5秒后页面跳转
RN122-1-02-18M PDF预览

RN122-1-02-18M

更新时间: 2024-11-25 02:48:11
品牌 Logo 应用领域
夏弗纳 - Schaffner LTE
页数 文件大小 规格书
9页 1345K
描述
Current-compensated Chokes

RN122-1-02-18M 技术参数

是否Rohs认证:符合生命周期:Active
Reach Compliance Code:compliant风险等级:2.23
Is Samacsys:N认证:UL; IEC; VDE; ENEC-10
滤波器类型:SINGLE PHASE EMI FILTER高度:16.5 mm
长度:28 mm安装类型:THROUGH HOLE MOUNT
工作频率:50/60Hz Hz最高工作温度:100 °C
最低工作温度:-40 °C物理尺寸:L28.0XB27.0XH16.5 (mm)/L1.102XB1.063XH0.65 (inch)
额定电流:1 A额定电压:300 V
宽度:27 mmBase Number Matches:1

RN122-1-02-18M 数据手册

 浏览型号RN122-1-02-18M的Datasheet PDF文件第2页浏览型号RN122-1-02-18M的Datasheet PDF文件第3页浏览型号RN122-1-02-18M的Datasheet PDF文件第4页浏览型号RN122-1-02-18M的Datasheet PDF文件第5页浏览型号RN122-1-02-18M的Datasheet PDF文件第6页浏览型号RN122-1-02-18M的Datasheet PDF文件第7页 
Common-mode Chokes RN series  
DATASHEET  
Current-compensated Chokes  
Rated currents from 0.3 to 10 A  
Approvals & Compliances  
DC to 400 Hz frequency  
100 kHz to 3 MHz common-mode resonance  
frequency  
Dual-choke configurations  
Multiple PCB-mounting options  
RN chokes are attenuating common-mode or  
asymmetric (P/N –> E) interference signals, by being  
connected in series with the phase and neutral lines  
of an AC powerline input. Symmetrical components  
of the noise are also attenuated by the leakage  
inductance (stray inductance) of the windings. These  
chokes are typically used in conjunction with  
suppression capacitors.  
Performance indicators  
Features and benefits  
High saturation resistance and excellent thermal  
behavior  
Through hole pin connections  
Dual-choke configuration  
Technical specifications  
Small compact design  
Multiple housing options  
300 VAC  
Operating voltage  
Operating frequency  
Rated currents  
Custom-specific versions are available on request  
Higher temperature versions  
DC to 400 Hz  
0.3 to 10 A @ rated ambient temperature  
0.4 to 100 mH  
Fully potted design usable for ruggedized  
applications  
Rated inductance  
Stray inductance  
Typically 1% of L  
N
Less than 10% (25°C)  
Inductance reduction (DC bias with IN)  
Typical applications  
1500 VAC, 60 sec, guaranteed  
1500 VAC, 2 sec, factory test  
High potential test voltage winding-to-  
winding @ 25°C  
Switch-mode power applications  
Suppressing common-mode interference levels  
EMI input filters  
4000 VAC, 60 sec, guaranteed  
>5,000,000 hours  
winding-to-housing @ 25°C  
MTBF @ 40°C/230 V (Mil-HB-217F)  
Surge current @ 10 msec  
20 x I @ 25°C  
N
For suppression-equipment with no earth  
connection  
-40°C to 100°C (40/100/56)  
acc. IEC 60068-1  
Temperature range (operation and storage)  
Phase-angle control circuits in combination with  
saturating chokes  
Potting compound UL 94V-0  
Housing UL 94V-0  
Flammability corresponding to  
Ringcore coating UL 94V-0  
UL 1283, IEC/EN 60938-1  
Design corresponding to  
Typical electrical schematic  

与RN122-1-02-18M相关器件

型号 品牌 获取价格 描述 数据表
RN122-1-02-27 ETC

获取价格

Current-compensated Chokes
RN1222 TOSHIBA

获取价格

TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)
RN122-2.5/02 ETC

获取价格

CHOKE 5.6MH 2.5A
RN122-2.5-02 ETC

获取价格

Current-compensated Chokes
RN122-2.5-02-5M6 Schaffner

获取价格

Current-compensated Chokes
RN122-2/02 ETC

获取价格

DROSSEL NETZ PCB 6.8MH 2.0A
RN122-2-02 ETC

获取价格

Current-compensated Chokes
RN122-2-02-5M0 Schaffner

获取价格

Current-compensated Chokes
RN122-2-02-6M8 Schaffner

获取价格

Current-compensated Chokes
RN1223 TOSHIBA

获取价格

TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)