Applicable STANDARD
-25 C to
+85 C
-10 C to +60 C
Operating
Storage temperature
range
Rating
temperature range
Voltage
AC 350 V, DC 490 V
5 A
Current
Applicable cable
φ9±0.2
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
X
X
X
X
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
Marking
ELECTRIC CHARACTERISTICS
X
X
X
X
4
m MAX.
M MIN.
Contact resistance
Contact measured at DC 1 A.
1000
Insulation resistance
500
V DC.
X
X
Voltage proof
1000
V AC. for 1 min.
No breakdown.
MECHANICAL CHARACTERISTICS
Contact insertion and
Measured with φ0.991+0.003 steel pin gage.
Insertion and withdrawal forces: 0.2 N MIN.
Connector Mating and Unmating Forces :70 N MAX.
0
X
X
-
-
withdrawal forces
Mating and Unmating Forces Measured with an applicable connector.
Without locking device.
Contact resistance:
8
m MAX.
Mechanical operation
Mated and unmated 2,000 times.
X
X
-
-
①No electrical discontinuity of 10 s.
②No damage, crack and looseness, of parts.
Vibration
Frequency: 10 → 55 → 10 Hz, Single Amplitude 0.75
mm, 5min/cycle, for 10 cycles in each of three
mutually perpedicular directions.
① No electrical discontinuity of 10 s.
② No damage, crack and looseness, of parts.
Shock
In opposite directions of each 3 dimension axis for
3 times at 490 m/s2 duration of pulse 11 ms.
X
X
X
-
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Subjected to 40゚C, at a humidity of 90〜95% for 96h.
① Insulation resistance: 100 MΩ MIN
(When dry).
(Steady state)
② No damage. Crack and looseness of parts.
① Insulation resistance: 100 MΩ MIN.
② No damage. Crack and looseness of parts.
Rapid change of temperature Temperature -55→ R/T(1) → +85 → R/T ℃
Time 30 → 2 to 3 → 30 → 2 to 3 min
for 5 cycles.
Corrosion salt mist
Heat Resistance
Cold Resistance
Subjected to 5% salt spray for 48h.
Subjected to +85゚C for 96h.
Subjected to -55゚C for 96h.
No heavy corrosion ruins the function.
No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
X
X
X
X
-
-
-
-
Resistance to soldering
heat
Soldering iron is placed to the soldering surface for No deformation or excessive looseness of
3 s. (Iron tip temperature +380±10℃) terminals.
Soldering iron is placed to the soldering surface for Soldering surface shall be free from pin-holes,
Solder ability
X
-
3 s. (Iron tip temperature +350±10℃)
de-wetted and un-wetted areas and other efects.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
APPROVED
CHECKED
DESIGNED
REMARKS
Note (1) R/T : Room temperature
TP.KOMATSU
HY.KOBAYASHI
TY.SUZUKI
20211229
20211229
20211229
DRAWN
KR.SUZUKI
20211019
Unless otherwise specified, refer to IEC 60512(JIS C 5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-007493-81-00
RM15TPD-12S(81)
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
CL0109-0661-8-81
△
FORM HD0011-2-1