RA D I O F R E Q U E N C Y I D E N T I F I C A T I O N SY S T E M S
HF Reader System Series 6000
S6550 Long Range Reader (Housed)
Specifications:
Part number
RI-STU-655A
Operating Frequency
Supported Transponders
Power Supply
13.56MHz 7kHz
Tag-it HF, Tag-it HF-I, ISO 15693 compliant Transponders
100 - 120V / 60Hz or
220 - 240V / 50Hz switch selected
Power consumption
Transmitter power
Max. 60W
0.5W to 10W 1dB (adjustable by software in 0.25W steps)
above 4W output power an additional heat sink 0.8K/W is necessary
Transmitter modulation
Antenna connection
AM (10% - 30%) 6% or 100% (adjustable by software)
Basic antenna (TX/RX)
1 x SMA female
1 x SMA female
Complementary antenna (RX only)::
Antenna Impedance
Receive channels
50 Ohm at 13.56MHz
ASK 423.75kHz and FSK 423.75kHz / 484.29kHz for both antennas
(adjustable by software)
Communication Interfaces
Address setting for interface
RS232 or RS485 (set by jumper)
Optional: - 3-position DIP switch (up to 8 addresses)
- Software (up to 254 addresses)
Communication Parameters
Communication Protocol
Memory
Up to 115kBits, 8 data bits, even/odd/no parity
ISO Host Protocol
EEPROM 1kByte (for parameters; up to 10,000 write cycles)
RAM
Flash
256 kByte (for data)
512 kByte (for firmware; update via communication interface)
Outputs
2 opto-coupled:
1 relay:
24V DC / 30mA
24V DC / 60W
Inputs
2 opto-coupled:
max. 24V DC / 20mA
Synchronization
Operating Temperature
Storage Temperature
Vibration
Protocol synchronization via I/O
-20°C to +55°C
-25°C to +85°C
EN60068-2-6 (10Hz to 200Hz: 0.15mm/2g)
Powder-coated sheet steel, look-up hinged lid
IP54
Casing
Protection class
Dimensions (L x W x H)
Weight
300mm x 200mm x 160mm
5.5 kg
For more information, contact the sales office or distributor nearest you. This contact information can be found
on our web site at:
http://www.ti-rfid.com
Texas Instruments reserves the right to change its products and services at any time without notice. TI provides customer assistance in various
technical areas, but does not have full access to data concerning the uses and applications of customers products. Therefore, TI assumes no
responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance
provided by TI.
© Copyright 2001 Texas Instruments Incorporated.
11-06-22-100 07/01