RHFLVDS31A
Rad-hard quad LVDS driver
Datasheet - production data
• Guaranteed up to 300 krad TID
• SEL immune up to 135 MeV.cm²/mg
• SET/SEU immune up to 67 MeV.cm²/mg
Description
The RHFLVDS31A is a quad, low-voltage,
differential signaling (LVDS) driver specifically
designed, packaged, and qualified for use in
aerospace environments in a low-power and fast
point-to-point baseband data transmission
standard.
Ceramic Flat-16
The upper metallic lid is
electrically connected to ground
Operating at 3.3 V power supply, the
RHFLVDS31A operates over a controlled
impedance of 100-ohm transmission media that
may be printed circuit board traces, back planes
or cables.
Features
• LVDS output
The circuit features an internal fail-safe function to
ensure a known state in case of floating input. All
pins have cold spare buffers to ensure they are in
• CMOS input
• Enable/Disable function with high-impedance
• ANSI TIA/EIA-644 compliant
• 400 Mbps (200 MHz)
high impedance when V is tied to GND.
CC
Designed on ST's proprietary CMOS process with
specific mitigation techniques, the RHFLVDS31A
achieves “best in the class” for hardness to total
ionisation dose and heavy ions.
• Cold spare on all pins
• 3.3 V operating power supply
• 4.8 V absolute rating
The RHFLVDS31A can operate over a large
temperature range of -55 °C to +125 °C and it is
housed in an hermetic Ceramic Flat-16 package.
• Output voltage: 350 mV on 100-ohm load
• Power consumption: 55 mW at 3.3 V
• Hermetic package
Table 1. Device summary
Reference
SMD pin
Quality level Package Lead finish
Mass EPPL(1) Temp. range
Engineering
RHFLVDS31AK1
-
-
Ceramic
Flat-16
-55 °C to
125 °C
model
Gold
0.65 g
RHFLVDS31AK01V 5962F98651 QML-V flight
1. EPPL = ESA preferred part list
Target
April 2017
DocID025370 Rev 4
1/15
This is information on a product in full production.
www.st.com