RFPA1802
RFPA1802
RFPA1802
Integrated Power Amplifier
1600MHz to 2000MHz
Package: MCM, 10-pin,
2.0mm x 2.5mm x 0.9mm
The RFPA1802 has over 28dB of small signal gain over 1600MHz
to 2000MHz. When used with DPD at 3.3V, the RFPA1802 can
deliver 24dBm LTE Downlink (CFR 7.5dB) with ACPR <-50dBc.
Two digital control pins select high, medium or low power modes if
desired to optimize performance and current drain at different
power levels. The RFPA1802 has an integrated directional
coupler, integrated biasing circuitry, and integrated matching to
50Ω. No external DC blocking is required as the RF pins are at
DC ground.
Features
■
POUT = 24dBm, 25% PAE, with
3.3V, 20MHz LTE DL, CFR 7.5dB
■
■
ACP <-50dBc with DPD
28dB Gain over 1600MHz to
2000MHz
■
■
Instantaneous P3dB = 32dBm at
3.3V
Designed to Support Flexible VCC
0.5V to 4.5V for PAE Optimization
■
■
■
■
■
■
■
■
Envelope Tracking Compatible
Integrated Power Coupler
Integrated 50Ω Matching
Integrated Biasing
VBAT
RF IN
1
2
3
4
5
10
9
VCC
RF OUT
CPL IN
GND
No External DC Block Needed
3 Power Mode Operation
GPIO Interface
8
VMODE1/GND
VMODE0
VEN
Bias,
Ultra Small and Low Profile
mode &
enable
controls
7
Applications
■
6
CPL OUT
Power Amplifier, Power Amplifier
Driver
Functional Block Diagram
■
■
■
■
Small Cell Base Stations
Wideband Instrumentation
Customer Premise Equipment
Data Cards
Ordering Information
RFPA1802SQ
Sample bag with 25 pieces
RFPA1802SR
7" Reel with 100 pieces
7" Reel with 2500 pieces
RFPA1802TR7
RFPA1802PCK-410
1600MHz to 2000MHz PCBA with 5-piece sample
bag
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150602
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 10