RFPA0802
RFPA0802
RFPA0802
Integrated Power Amplifier
700MHz to 950MHz
Package: MCM, 10-pin,
2.0mm x 2.5mm x 0.9mm
The RFPA0802 has over 28dB of small signal gain over 700MHz
to 950MHz. When used with DPD at 3.3V, the RFPA0802 can
deliver 24dBm LTE Downlink (CFR 7.5dB) with ACPR <-50dBc.
Two digital control pins select high, medium or low power modes if
desired to optimize performance and current drain at different
power levels. The RFPA0802 has an integrated directional
coupler, integrated biasing circuitry, and integrated matching to
50Ω. No external DC blocking is required as the RF pins are at
DC ground.
Features
■
POUT = 24dBm, 26% PAE, with
3.3V, 20MHz LTE DL, CFR 7.5dB
■
■
ACP <-50dBc with DPD
28dB Gain over 700MHz to
950MHz
■
■
Instantaneous P3dB = 32dBm at
3.3V
Designed to Support Flexible VCC
0.5V to 4.5V for PAE Optimization
■
■
■
■
■
■
■
■
Envelope Tracking Compatible
Integrated Power Coupler
Integrated 50Ω Matching
Integrated Biasing
VBAT
RF IN
1
2
3
4
5
10
9
VCC
RF OUT
CPL IN
GND
No External DC Block Needed
3 Power Mode Operation
GPIO Interface
8
VMODE1/GND
VMODE0
VEN
Bias,
Ultra Small and Low Profile
mode &
enable
controls
7
Applications
■
6
CPL OUT
Power Amplifier, Power Amplifier
Driver
Functional Block Diagram
■
■
■
■
Small Cell Base Stations
Wideband Instrumentation
Customer Premise Equipment
Data Cards
Ordering Information
RFPA0802SQ
Sample bag with 25 pieces
RFPA0802SR
7" Reel with 100 pieces
7" Reel with 2500 pieces
RFPA0802TR7
RFPA0802PCK-410
700MHz to 950MHz PCBA with 5-piece sample
bag
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150209
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 13