RFM63W
RFM63W ISM TRANSCEIVER MODULE V1.2
ADVANCED COMMUNICATIONS & SENSING
General Description
The RFM63W is a low cost transceiver module
operating in the 868 and 915MHz frequency bands,
The RFM63W is optimized for very low power
consumption (3mA in receiver mode). It incorporates a
baseband modem with data rates up to 200 kb/s. Data
handling features include a sixty-four byte FIFO,
packet handling, automatic CRC generation and data
whitening.
All major RF communication parameters are
programmable and most of them may be dynamically
set. It complies with European (ETSI EN 300-220
V2.1.1) and North American (FCC part 15.247 and
15.249) regulatory standards.
RFM63W
In order to better use RFM63W modules, this
specification also involves a large number of the
parameters and functions of its core chip RF63's,
including those IC pins which are not leaded out. All
of these can help customers gain a better
understanding of the performance of RFM63W
modules, and enhance the application skills.
Applications
•
•
•
•
•
•
Wireless alarm and security systems
Wireless sensor networks
Automated Meter Reading
Home and building automation
Industrial monitoring and control
Remote Wireless Control
Features
•
•
•
Low Rx power consumption: 3mA
Low Tx power consumption: 25 mA @ +10 dBm
Good reception sensitivity: down to -105 dBm at
25 kb/s in FSK, -111 dBm at 2kb/s in OOK
Programmable RF output power: up to +12 dBm in
8 steps
Packet handling feature with data whitening and
automatic CRC generation
Wide RSSI (Received Signal Strength Indicator)
dynamic range, 70dB from Rx noise floor
Bit rates up to 200 kb/s, NRZ coding
On-chip frequency synthesizer
•
•
•
•
•
•
•
•
FSK and OOK modulation
Incoming sync word recognition
Built-in Bit-Synchronizer for incoming data and
clock synchronization and recovery
Module Size: 19.7X16mm
Optimized Circuit Configuration for Low-cost
applications
•
•
Page 1 of 91
Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com