W
RFM119W/RFM119SW
Featurs
Embedded EEPROM
y Very Easy Development with RFPDK
y All Features Programmable
Frequency Range: 240 to 960 MHz
FSK, GFSK and OOK Modulation
Symbol Rate:
0.5 to 100 ksps (FSK/GFSK)
0.5 to 30 ksps (OOK)
Deviation: 1.0 to 200 kHz
Two-wire Interface for Registers Accessing and
EEPROM Programming
Output Power: -10 to +13 dBm
Supply Voltage: 1.8 to 3.6 V
Sleep Current: < 20 nA
FCC/ETSI Compliant
RFM119W
RoHS Compliant
Module Size:17.8*12.8*5.0mm (RFM119W)
16*16*5.0mm (RFM119SW)
Descriptios
The RFM119W/RFM119SW is a high performance,
highly
flexible, low-cost, single-chip (G)FSK/OOK
transmitter for various,240 to 960 MHz wireless
applications. It is a part of the HOPERF NextGenRFTM
family, which includes a complete line of transmitters,
receivers and transceivers. The RFM119W/RFM119SW
provides the simplest way to control the data
transmission. The transmission is started when an
effective level turnover is detected on the DATA pin,
while the transmission action will stop after the DATA pin
holding level low for a defined time window, or after a
two-wire interface (TWI) command is issued. The chip
features can be configured in two different ways: setting
the configuration registers through the TWI, or
programming the embedded
RFM119SW
Applications
RFPDK. The device operates from a supply voltage of 1.8
V to 3.6 V, consumes 27.6 mA (FSK @ 868.35 MHz)
when transmitting +10 dBm output power, and only leak
Low-Cost Consumer Electronics Applications
Home and Building Automation
Remote Fan Controllers
20 nA when
it
is
in
sleep
state.
The
Infrared Transmitter Replacements
Industrial Monitoring and Controls
Remote Lighting Control
RFM119W/RFM119SW transmitter together with the
CMT2219A receiver enables a robust RF link.
Wireless Alarm and Security Systems
Remote Keyless Entry (RKE)
E-mail:sales@hoperf.com
Rev 1.0 | Page 1 /19
www.hoperf.com