RF1199
• Ideal Front-End Filter for 291.4 MHz Wireless Receivers
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
• Rugged TO39 Hermetic Package
• Complies with Directive 2002/95/EC (RoHS)
297.4 MHz
SAW Filter
Pb
The RF1199 is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 291.4 MHz receivers.
Absolute Maximum Ratings
Rating
Value
+13
Units
dBm
VDC
°C
Incident RF Power
Max. DC voltage between any 2 terminals
Case Temperature
±30
-45 to +85
Max. Soldering Profile
265°C for 10 s
TO39-3 Case
Rating
Value
Units
Incident RF Power
+13
±30
dBm
VDC
°C
DC Voltage Between Any Two Pins (Observe ESD Precautions)
5
-45 to +85
Case Temperature
Electrical Specifications
Characteristic
Sym
Notes
Minimum
Typical
Maximum
Units
f
Center Frequency at 25°C
Absolute Frequency
291.300
291.40
291.500
±100
MHz
kHz
c
1, 2
Δf
Tolerance from 291.4 MHz
C
Insertion Loss
3 dB Bandwidth
Rejection
IL
1
5.0
dB
BW
1, 2
kHz
500
45
600
50
800
3
at f - 21.4 MHz (Image)
c
at f - 10.7 MHz (LO)
1
dB
15
40
80
c
Ultimate
T
Temperature
Operating Case Temp.
Turnover Temperature
Turnover Frequency
-35
24
+85
54
°C
°C
C
T
39
O
3, 4
f
f +2
MHz
ppm/°C
O
c
2
FTC
Freq. Temp. Coefficient
Absolute Value during the First Year
Series Inductance
0.032
≤10
85
Frequency Aging
|fA|
L
5
1
ppm/yr
nH
External Impedance
C
5
18
pF
Shunt Capacitance
Lid Symbolization (in addition to Lot and/or Date Codes)
RFM RF1199
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1.
2.
Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 Ω test system with VSWR ≤
1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, f . Note that insertion loss, bandwidth, and passband shape
c
are dependent on the impedance matching component values and quality.
The frequency f is defined as the midpoint between the 3dB frequencies.
c
3.
4.
Where noted, specifications apply over the entire specified operating temperature range.
The turnover temperature, T , is the temperature of maximum (or turnover) frequency, f . The nominal frequency at any case temperature, T , may be
O
o
c
2
calculated from: f = f [1 - FTC (T - T ) ].
o
o
c
5.
Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C.
Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
6.
7.
8.
The design, manufacturing process, and specifications of this device are subject to change without notice.
One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
www.RFM.com
E-mail: info@rfm.com
Page 1 of 2
©2008 by RF Monolithics, Inc.
RF1199 - 3/28/08