®
RF1171
•
•
•
•
•
Ideal Front-End Filter for Wireless Receiver in the UK and USA
Low-Loss, Coupled-Resonator Quartz Design
Simple External Impedance Matching
418.0 MHz
SAW Filter
Rugged TO39 Hermetic Package
Complies with Directive 2002/95/EC (RoHS)
Pb
The RF1171 is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 418.0 MHz receivers. Receiver designs using this filter include superhet with
10.7 MHz direct conversion and superregen. Typical applications of these receivers are wireless remote-
control and security devices operating in the USA under FCC Part 15.
This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater
than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF. RFM’s ad-
vanced SAW design and fabrication technology is utilized to achieve high performance and very low loss with
simple external impedance matching (not included). Quartz construction provides excellent frequency stabil-
ity over a wide temperature range.
TO39-3 Case
Electrical Characteristics
Characteristic
Sym
Notes
Minimum
Typical
Maximum
Units
Nominal Frequency
f
417.920
418.080
MHz
c
1, 2
Tolerance from 418.0 MHz
Dfc
IL
±80
5.5
dB
dB
Insertion Loss
1
3.0
3 dB Bandwidth
BW
500
40
600
800
1, 2
kHz
3
Rejection
at f - 21.4 MHz (Image)
50
30
80
C
at f - 10.7 MHz (LO)
1
15
dB
C
Ultimate
Temperature
Operating Case Temp.
T
T
-35
15
+85
35
°C
°C
C
Turnover Temperature
Turnover Frequency
Freq. Temp. Coefficient
25
O
3, 4
f
f
MHz
O
C
2
FTC
0.032
ppm/°C
Frequency Aging
Absolute Value during the First Year
Series Inductance
|fA|
L
5
1
£10
ppm/yr
nH
External Impedance
6 Turns of 0.3 mm Insulated Copper, 1.9 mm ID
Shunt Capacitance
C
12
pF
Lid Symbolization (in addition to Lot and/or Date Codes)
RFM RF1171
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 W test system with
VSWR £ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, f . Note that insertion loss, bandwidth,
c
and passband shape are dependent on the impedance matching component values and quality.
2. The frequency f is defined as the midpoint between the 3dB frequencies.
c
3. Unless noted otherwise, specifications apply over the entire specified operating temperature range.
4. The turnover temperature, T , is the temperature of maximum (or turnover) frequency, f . The nominal frequency at any case temperature, T , may
O
o
c
2
be calculated from: f = f [1 - FTC (T - T ) ].
o
o
c
5. Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
6. The design, manufacturing process, and specifications of this device are subject to change without notice.
7. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
8. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
RF Monolithics, Inc.
RFM Europe
Phone: (972) 233-2903
Phone: 44 1963 251383
Fax: (972) 387-9148
Fax: 44 1963 251510
E-mail: info@rfm.com
http://www.rfm.com
RF1171-082201
Page 1 of 2
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
