APPLICABLE STANDARD
Operating
Storage Temperature
Range
-55 ℃ TO +85 ℃(Note 1)
-55 ℃ TO +60 ℃(Note 2)
Temperature Range
Rating
Operating
Range
Humidity
Voltage
Current
350 V AC, 490 V DC
3 A
95 % max.
Applicable Wire
-
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT
AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
x
x
x
x
Marking
ELECTRICAL CHARACTEREISTICS
Contact Resistance
25 mΩ max.
Measured at 100 mA max (DC or 1000 Hz).
x
x
x
Contact Resistance
(Under low voltage, low current
condition)
Measured at 20 mV DC, 1 mA (DC or 1000 Hz)
-
Insulation Resistance
500 V DC
5000 MΩ min.
x
x
x
x
Voltage Proof
1250 V AC. for 1 min.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Contact Insertion and
Measured with steel pin, φ1.041 max, φ0.991 min
3.33 N max
x
x
x
x
-
-
-
-
Extraction Forces
0.28 N min
Mating and Unmating Forces Measured with an applicable connector.
Mating force : 166.7 N max.
Unmating force : 110.8 N max.
① Contact resistance: 25 mΩ max.
② No damage, crack and looseness of parts.
Mechanical Operation
Vibration
Mated and unmated 500 times.
Frequency : 10 to 55 Hz, singe amplitude 0.75 mm,
① No electrical discontinuity of 10 μs.
② No damage, crack and looseness of parts.
for 2h each in 3 axial directions.
490 m/s2 duration of pulse 11 ms for 3 times
in 3 both axial directions.
Shock
x
-
ENVIRONMENTAL CHARACTERISTICS
Temperature –55 → 5 to 35 → 85 → 5 to 35 ℃
No damage, crack and looseness of parts.
Rapid Change of Temperature
x
x
-
-
Time
30 → 2 to 3 → 30 → 2 to 3 min
Under 5 cycles.
Humidity Life
Exposed at 40 C, 90 to 95 %, 96 h.
① Insulation resistance :
10 MΩ min. (at high humidity.)
1000 MΩ min. (at dry.)
② No damage, crack and looseness of parts.
No heavy corrosion that lose function.
Corrosion Salt Mist
Exposed in 5 % salt water spray for 48 h.
x
x
-
-
Resistance to Soldering Heat Solder temperature, 260 ± 5 C for immersion, duration
No deformation of case and excessive looseness of
the terminals.
10 ± 1 s.
Solderability
Soldered at solder temperature, 245 ± 2 C for immersion,
duration 3 ± 1 s.
Min. 95 % of solder immersed area shall be covered
new solder coating.
x
-
(Note 1) The operation temperature includes the temperature rise by current carrying.
(Note 2) Storage temperature range shows storage condition for unused products including packing materials.
Follow the operating temperature range for storage condition after mounting.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
RI.TAKAYASU
KI.NAGANUMA
HN.ANDO
18.06.01
18.05.31
18.05.31
18.05.31
HN.ANDO
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-023885-05-00
RDDB-50S-LNA(05)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1
PART NO.
CODE NO
CL211-0731-6-05
0
△
1/1