APPLICABLE STANDARD
Operating
Storage Temperature
Range
-55-85
-25-60
Temperature Range
Rating
Operating
Range
Humidity
Voltage
Current
350 V AC, 450 V DC
3 A
95%
Applicable Wire
-
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT
AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
x
x
x
x
Marking
ELECTRICAL CHARACTEREISTICS
Contact Resistance
25 mΩ max.
Measured at 100 mA max (DC or 1000 Hz).
x
x
x
Contact Resistance
(Under low voltage, low current
condition)
Measured at 20 mV DC, 1 mA (DC or 1000 Hz)
-
Insulation Resistance
500 V DC
5000 MΩ min.
x
x
x
x
Voltage Proof
1250 V AC. for 1 min.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Mating and Unmating Forces Measured with an applicable connector.
Mating force : 50.0 N max.
Unmating force : 33.3 N max.
① Contact resistance: 25 mΩ max.
x
x
x
-
-
-
Mechanical Operation
Vibration
Mated and unmated 500 times.
② No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Frequency : 10 to 55 Hz, singe amplitude 0.75 mm,
for 2h each in 3 axial directions.
490 m/s2 duration of pulse 11 ms for 3 times
in 3 both axial directions.
Shock
x
-
ENVIRONMENTAL CHARACTERISTICS
Temperature –55 → 5 to 35 → 85 → 5 to 35 ℃
No damage, crack and looseness of parts.
Rapid Change of Temperature
x
x
-
-
Time
30 → 2 to 3 → 30 → 2 to 3 min
Under 5 cycles.
Humidity Life
Exposed at 40 C, 90 to 95 %, 96 h.
① Insulation resistance :
10 MΩ min. (at high humidity.)
1000 MΩ min. (at dry.)
② No damage, crack and looseness of parts.
No heavy corrosion that lose function.
Corrosion Salt Mist
Exposed in 5 % salt water spray for 48 h.
x
x
-
-
Resistance to Soldering Heat Solder temperature 260 ± 5 C for immersion, duration 10 ± 1 No deformation of case and excessive looseness of
s.
the terminals.
Solderability
Soldered at solder temperature 245 ± 2 C for immersion,
duration 3 ± 1 s.
Min. 95 % of solder immersed area shall be covered
new solder coating.
x
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
REMARK
APPROVED
TU.TANIGUCHI
20200803
20200803
20200803
20200803
CHECKED
DESIGNED
DRAWN
TU.TANIGUCHI
KN.ICHIKAWA
CT.YAMAMOTO
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-021985-55-00
RDAD-15PE-LNA(55)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1
PART NO.
CODE NO
CL211-0510-7-55
0
△
1/1