Document 1257-1
For TI UCC2897 12 V/150 W
Active Clamp Forward
SMT Planar Transformer
• Developed for Texas Instruments UCC2897 Active Clamp
Forward (PMP9720 reference design)
• Designed for 48 – 60 Vdc input; 12 V, 13 A
• High efficiency; excellent DCR; very low leakage inductance;
1500 Vrms, one minute primary to secondary isolation.
• Provides 0.009″ (0.229 mm) clearance above the seating plane
Core material Ferrite
Terminations Matte tin over nickel over brass.
Weight 12.7 g
Ambient temperature –40°C to +125°C
Maximum part temperature +165°C (ambient + temp rise)
Storage temperature Component: –40°C to +125°C.
Tray packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 36 per tray
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Primary
inductance1
2ꢀ (ꢁµ)
Leakage
inductance2
max (ꢁµ)
Volt-time
Turns
N1 N2 Sec Aux
DCR max (mOhms)
Part
number
product typ4
(Vꢁsec)
Pri3
Sec
Aux
Output5
RA7040-AL
6
6
3
3
50
0.55
10.75
4.25
61.1
100
12 V, 13 A
1. Inductance is for the primary, measured on Agilent/HP 4284A at 200 kHz, 0.5 Vrms, 0 Adc with primary
windings connected in parallel.
2. Leakage Inductance is for the primary, measured at 200 kHz, 0.5 Vrms, 0 Adc with primary windings
connected in parallel and all secondary pins shorted.
3
2
11
Pri N1
N2
10
3. Primary DCR measured with primary windings connected in parallel
4. Volt-time product is based on primary windings connected in parallel.
5. Output of the secondary, 12 V 13 A, is from pins 11 – 8, Output of the aux winding is 12 V.
6. Electrical specifications at 25°C.
4
5
Sec
9
1
Aux
6
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
8
Primary windings to be connected
in parallel on the PC board.
Specifications subject to change without notice.
Document 1257-1 Revised 04/02/15
US +1-847-639-6400 sales@coilcraft.com
Please check our website for latest information.
UK +44-1236-730595 sales@coilcraft-europe.com
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg