Datasheet
R01DS0366EJ0130
Rev.1.30
RA6M5 Group
Renesas Microcontrollers
Jul 28, 2023
High-performance 200 MHz Arm Cortex-M33 core, up to 2 MB code flash memory with Dual-bank, background and SWAP
operation, 8 KB Data flash memory, and 512 KB SRAM with Parity/ECC. High-integration with Ethernet MAC controller, USB
2.0 High-Speed, CAN FD, SDHI, Quad and Octa SPI, and advanced analog. Integrated Secure Crypto Engine with
cryptography accelerators, key management support, tamper detection and power analysis resistance in concert with Arm
TrustZone for integrated secure element functionality.
Features
®
®
● Realtime Clock (RTC) with calendar and VBATT support
● Event Link Controller (ELC)
■
Arm Cortex -M33 Core
● Armv8-M architecture with the main extension
● Maximum operating frequency: 200 MHz
● Arm Memory Protection Unit (Arm MPU)
– Protected Memory System Architecture (PMSAv8)
– Secure MPU (MPU_S): 8 regions
– Non-secure MPU (MPU_NS): 8 regions
● SysTick timer
– Embeds two Systick timers: Secure and Non-secure instance
– Driven by LOCO or system clock
● CoreSight ETM-M33
● Data Transfer Controller (DTC)
● DMA Controller (DMAC) × 8
● Power-on reset
● Low Voltage Detection (LVD) with voltage settings
● Watchdog Timer (WDT)
● Independent Watchdog Timer (IWDT)
■ Human Machine Interface (HMI)
● Capacitive Touch Sensing Unit (CTSU)
™
■ Multiple Clock Sources
■ Memory
● Main clock oscillator (MOSC) (8 to 24 MHz)
● Sub-clock oscillator (SOSC) (32.768 kHz)
● High-speed on-chip oscillator (HOCO) (16/18/20 MHz)
● Middle-speed on-chip oscillator (MOCO) (8 MHz)
● Low-speed on-chip oscillator (LOCO) (32.768 kHz)
● IWDT-dedicated on-chip oscillator (15 kHz)
● Clock trim function for HOCO/MOCO/LOCO
● PLL/PLL2
● Up to 2-MB code flash memory
● 8-KB data flash memory (100,000 program/erase (P/E) cycles)
● 512-KB SRAM
■ Connectivity
● Serial Communications Interface (SCI) × 10
– Asynchronous interfaces
– 8-bit clock synchronous interface
– Smart card interface
● Clock out support
– Simple IIC
– Simple SPI
■ General-Purpose I/O Ports
● 5-V tolerance, open drain, input pull-up, switchable driving ability
– Manchester coding (SCI3, SCI4)
2
● I C bus interface (IIC) × 3
■ Operating Voltage
● VCC: 2.7 to 3.6 V
● Serial Peripheral Interface (SPI) × 2
● Quad Serial Peripheral Interface (QSPI)
● Octa Serial Peripheral Interface (OSPI)
● USB 2.0 Full-Speed Module (USBFS)
● USB 2.0 High-Speed Module (USBHS)
● CAN with Flexible Data-rate (CANFD) × 2
● Ethernet MAC/DMA Controller (ETHERC/EDMAC)
● SD/MMC Host Interface (SDHI)
■ Operating Temperature and Packages
● Ta = -40℃ to +105℃
– 176-pin LQFP (24 mm × 24 mm, 0.5 mm pitch)
– 144-pin LQFP (20 mm × 20 mm, 0.5 mm pitch)
– 100-pin LQFP (14 mm × 14 mm, 0.5 mm pitch)
– 144-pin BGA (7 mm × 7 mm, 0.5 mm pitch)
● Ta = -40℃ to +85℃
● Serial Sound Interface Enhanced (SSIE)
● Consumer Electronics Control (CEC)
– 176-pin BGA (13 mm × 13 mm, 0.8 mm pitch)
■ Analog
● 12-bit A/D Converter (ADC12) × 2
– 5 Msps at interleaving
● 12-bit D/A Converter (DAC12) × 2
● Temperature Sensor (TSN)
■ Timers
● General PWM Timer 32-bit (GPT32) × 4
● General PWM Timer 16-bit (GPT16) × 6
● Low Power Asynchronous General Purpose Timer (AGT) × 6
■ Security and Encryption
● Secure Crypto Engine 9
– Symmetric algorithms: AES
– Asymmetric algorithms: RSA, ECC, and DSA
– Hash-value generation: SHA224, SHA256, GHASH
– 128-bit unique ID
®
®
● Arm TrustZone
– Up to three or six regions for the code flash, depending on the
bank mode
– Up to two regions for the data flash
– Up to three regions for the SRAM
– Individual secure or non-secure security attribution for each
peripheral
● Device lifecyle management
● Pin function
– Up to three tamper pins
– Secure pin multiplexing
■ System and Power Management
● Low power modes
● Battery backup function (VBATT)
R01DS0366EJ0130 Rev.1.30
Jul 28, 2023
Page 1 of 120