R1130H Series
300 mA LDO Regulator for Automotive Applications
NO.EC-078-131224
OUTLINE
The R1130x Series are CMOS-based voltage regulator (VR) ICs. VR function has features of high ripple
rejection, low dropout voltage, high output voltage accuracy, and ultra-low supply current. Each of these ICs
consists of a voltage reference unit, an error amplifier, resistors for setting output voltage, and a current limit
circuit. Each of the R1130xxxxA/B type includes also a chip enable circuit.
The output voltage of the R1130xxxxC type is adjustable with external resistors.
The output voltage of R1130xxxxA/B is fixed in the IC. Low supply current by the merit of CMOS process and
built-in transistors with low ON-resistance make low dropout voltage. These regulators in the R1130x Series are
remarkable improvement on the current regulators in terms of ripple rejection, input transient response, and load
transient response. Maximum Output Current is large for its compact size.
Since the package for these ICs is the SOT-89-5 package, high density mounting of the ICs on boards is
possible.
FEATURES
• Input Voltage Range (Maximum Rating) ................. 2.5V to 8.0V (9.0V)
• Supply Current.......................................................... Typ. 50μA
• Standby Current........................................................ Typ. 0.1μA (VR) for A type
• Chip Enable Function................................................ A Type: ”L” Active, B/C Type ”H” Active
• Ripple Rejection........................................................ Typ. 60dB (f=1kHz) (VR)
• Output Current .......................................................... Min. 300mA (VIN=VOUT+1V)
• Output Voltage Accuracy........................................... ±2.0%(VR) for A/B type,
±2.0% (Reference Voltage for adjustable VR) for C type
• Dropout Voltage ........................................................ Typ. 0.2V (VOUT=5.0V type) (VR)
• Output Voltage Range............................................... 1.5V to 5.0V (0.1V steps)
Externally specified with the ADJUST pin
(Reference Voltage 1.8V : C Version)
• Temperature-drift Coefficient of Output Voltage ...... ±100ppm/°C
•
Packages ................................................................. SOT-89-5
• Built-in Current Limit Circuit
• Internal Phase Compensation (small output capacitance such as 0.1µF Ceramic can be used with.)
APPLICATIONS
•
•
Power source for car accessories including car audio equipment, car navigation system, and ETC system.
Power source for control units including EV inverter and charge control.
1