IFR3500™ Rx IF/BASEBAND PROCESSOR
T
M
Q U A L C O M M C D M A T E C H N O L O G I E S
HTTP://WWW.CDMATECH.COM
E N A B L I N G T H E F U T U R E O F C O M M U N I C A T I O N S
VCO out
VCO tank TCXO
SBI and
Mode Ctl
Logic
mode
control
filter
tuner
VCO
A = 2, 3, 4, or 6
1/A
I offset
0
90
GPS
LPF
GPS /
digitized
Rx data (Q)
CDMA
IF input
CDMA
ADC
CDMA
LPF
AGC
CHIPx8/G
control
GPS
LPF
GPS /
CDMA
ADC
GPS
IF input
digitized
Rx data (I)
CDMA
LPF
Q offset
IFR3500 Functional Block Diagram
Overview
The range of supply voltage is from 2.7 V to 3.0 V,
which provides operating compatibility for platforms
utilizing a single-cell Li-Ion battery design. CDMA
and GPS mode selection, gain control, IF LO
At QUALCOMM CDMA Technologies (QCT), we strive to constantly
improve the indispensable communication tools we all use every day.
QCT creates state-of-the-art chipsets, system software, development
tools and products – such as the Launchpad™ suite of technologies and
software – that support the most advanced digital wireless features and
functionality available for wireless devices and base stations – while
continually reducing complexity, cost and board-space requirements.
frequency divide, and selective power-down modes
which permit optimized power savings are controlled
directly from the MSM device and system software. The IFR3500 device
is provided in a 32-pad BCC++ plastic package that includes an
exposed center ground slug for improved RF grounding, mechanical
strength, and thermal continuity.
The IFR3500™ device is a fully integrated IF-to-baseband processor
performing all CDMA and GPS receive (Rx) signal processing functions
required between the IF output from QCT’s RFR3100™ or RFR3300™
Rx front-end devices and at baseband with Mobile Station Modem
(MSM™) devices for IS-95 CDMA-only and ARIB-53 (Japan) J-CDMA
applications. The IFR3500 device leverages previous IFR3300™ circuit
designs, including GPS, and provides significant advantages in size and
cost for single-mode CDMA or single-mode plus gpsOne™- enabled
handsets. In conjunction with RFR3100 or RFR3300 devices, a
complete two-chip Rx radio implementation for CDMA handsets with
GPS position location capability is realized with minimum circuitry.
As with all QCT products, the IFR3500 device features the unparalleled
customer support you have come to expect from your partner of choice
for complete wireless communications solutions. QCT is committed to
providing innovative multi-mode, multi-network chipsets, system software
and development tools that will help ensure your competitive success in
the wire-less communications marketplace for 3G and beyond.
Features
• Dual-mode operation includes CDMA and GPS
• Rx digital baseband interface compatible with MSM3100™,
MSM3300™, MSM5105™, MSM5100™, and MSM5500™ devices
• IF LO synthesizer can be shared between IFR3500 and RFT3500
devices for easier frequency planning and reduced cost
• Rx power control through 90 dB dynamic range VGA
• IF mixer for down-converting IF to analog baseband for CDMA and
GPS
The IFR3500 device includes IF AGC amplifiers, IF VCO, selectable
frequency divider for IF LO, a quadrature IF-to-baseband downconverter,
in-phase (I) and quadrature (Q) baseband filters, and Analog-to-Digital
Converters (ADCs). Used in conjunction with QCT’s RFT3500™ device,
the IFR3500 device accommodates sharing of the IF LO synthesizer to
enable simplified frequency plans and reduced cost.
QUALCOMM, INCORPORATED
CDMA TECHNOLOGIES 5775 MOREHOUSE DRIVE SAN DIEGO, CA 92121
T
(858) 658-5005
F (858) 658-1556 cdma-technologies@qualcomm.com
5秒后页面跳转
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
国产PoE供电芯片选型替代指南，你想要的都在这里！
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
