REVISION AC
QTH-XXX-XX-X-D-DP-XXX
OPTION
No OF POSITIONS
-020, -040, -060, ***-080, ***-100
(PER ROW)
-A: ALIGNMENT PINS
(SEE FIGS 1 & 3, SHT 2)
***SEE NOTE 11
-LC: LOCKING CLIPS
(USE LC-08-TM-01, SEE FIG 2) (SEE NOTE 12)
-K: POLYIMIDE FILM (USE K-500-300)
(AVAILABLE ON -01 THRU -04 &
-09 AND -10 ONLY)(SEE FIG 4, SHT 2)
-TR: TAPE & REEL (60 POS MAX)
(40 POS MAX FOR -GP OPTION)
-GP: GUIDE POSTS OPTION
LEAD STYLE
-01: .1680[4.267]
*-02: .2861[7.264]
*-03: .4042[10.267]
*-04: .6001[15.243]
*-05: .7181[18.240]
*-06: .8361[21.237]
*-07: .9542[24.237]
*-08: 1.1511[29.238]
*-09: .5224[13.269]
*-10: .5618[14.270]
DO NOT
SCALE FROM
THIS PRINT
**
(AVAILABLE ON -01 & **-02 ONLY)
(USE QTH-30-XX-D-XX-GP)
(SEE FIG 8, SHT 4)
-RT1: RETENTION OPTION (SEE FIG 9, SHT 4)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(MUST USE -A OPTION)
C
"D" REF
PLATING SPECIFICATION
-F: 3µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE QTH-30-01-D-XX-A-RT1 & T-1R36-01-F)
(NOT AVAILABLE WITH -LC OR -GP)
(NOT AVAILABLE ON -080 & -100 POS)
-L: LATCHING OPTION (SEE FIG 10, SHT 5)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(USE QTH-30-01-D-XX-L)
.7875 20.003 REF
(USE T-1GXX-XX-F) (SEE NOTE 7)
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
9 EQ. SPCS
@ .059[1.50]
=.532 13.50 (TYP)
.020 0.50 REF
.059 1.50 REF
(USE T-1GXX-XX-L)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
(40 POS MAX)
-FL: FRICTION LOCKS (SEE FIG 11, SHT 5)
(NOT AVAILABLE WITH -GP)
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL (USE T-1GXX-XX-G)
-C: 50µ" ELECTRO-POLISHED SELECTIVE
IN CONTACT AREA, 3µ" GOLD ON
01
DIFFERENTIAL PAIRS
TAIL (USE T-1GXX-XX-L)
.155 3.94 REF
(SEE NOTE 13)
.235 5.97
REF
* = RELEASED FOR ASO ONLY
(APPLICATION SPECIFIC ORDER)
** = -02 LEAD STYLE NOT RELEASED
FOR PRODUCTION
ROW SPECIFICATION
-D: DOUBLE (USE QTH-30-01-D-XX)
02
No OF BANKS
.644 16.36 REF
.008 0.20 REF
.047 1.19 REF
C
QTH-30-XX-D-XX-A
T-1SXX-XX-X (SEE TABLE 1)
.098 2.49 REF
"A"
"A"
.155±.003 3.94±0.08
(SEE NOTE 13)
"B" REF
SEE NOTE 10
.003[.08]
C
"A"
C
.001[.03]
.745 18.92 REF
"E" REF
T-1G1-XX-X
(SEE NOTE 5 & 8)
SEE TABLE 2
(SEE NOTE 8)
.038 0.95 REF
.280 7.11
.035 0.89
REF
.031 0.79 REF
.015 0.38 REF
.0375 0.953
REF
SECTION "A"-"A"
NOTES:
FIG 1
C
1.
REPRESENTS A CRITICAL DIMENSION.
-A: ALIGNMENT PIN OPTION
(QTH-060-01-X-D-A SHOWN)
(FOR -01 & -02 LEAD STYLE ONLY)
2. MINIMUM PUSHOUT FORCE: 6 OZ FOR –01 & -02, 8 OZ FOR –03 THRU –09.
3. MINIMUM GROUND PLANE RETENTION: 1 LB.
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE OF .002[0.05]. APPLIES TO SIGNAL OR GROUNDS
INDEPENDENT OF THE GROUND OR SIGNAL PINS RESPECTIVELY.
6. LEAD STYLES -03 THRU -08: TOP BODY (QTH) CANNOT HAVE -A OPTION.
7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
-G PLATED GROUND PLANE CAN BE SUSTITUTED FOR –F PLATED GROUND PLANE.
8. GROUND PLANE PRESS HEIGHT MUST BE .003 [0.08] LESS THAN THE MAXIMUM
HEIGHT OR .002[0.03] GREATER THAN THE MINIMUM HEIGHT OF SIGNAL PIN.
9. T-1R36 RETENTION TO BODY TO BE 1.0 LBF.
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
ANGLES
2
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020[.051]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
10. CUT OFF BURR NOT TO EXCEED .003[0.08] IN ANY DIRECTION, BURR PLUS
TAB HEIGHT NOT TO EXCEED .006[0.15].
11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT
SAMTEC INTERCONNECT PROCESSING GROUP.
12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
13. PIN CAN EXTEND PAST WALL .003[0.08] MAX.
SHEET SCALE: 1.75:1
DO NOT SCALE DRAWING
MATERIAL:
.5mm DIFFERENTIAL PAIRS TERMINAL ASSEMBLY
DWG.
INSULATOR: LCP UL94V-0, COLOR: BLACK
TERMINAL & GROUND PLANE: PHOS BRONZE
QNTOH. -XXX-XX-X-D-DP-XXX
BY:
KEVIN B
09-14-2010 SHEET 1 OF 5
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-XXX-MKT.SLDDRW
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
