REVISION CJ
QTE-XXX-XX-XXX-D-XXX
No OF POSITIONS
OPTION
-020, -040, -060,
*-080, *-100
-A: ALIGNMENT PINS
DO NOT
SCALE FROM
THIS PRINT
-LC: LOCKING CLIPS(SEE NOTE 12)
(USE LC-08-TM-01)
(PER ROW)
* = (SEE NOTE 14 & 15)
(SEE FIG 2, SHT 2)
-K: POLYIMIDE FILM
LEAD STYLE
-01: .1680 [4.267]
-02: .2861 [7.267]
-03: .4042 [10.267]
-04: .6010 [15.265]
-05: .7190 [18.263]
-06: .8370 [21.260]
-07: .9540 [24.231]
-08: 1.1510 [29.260]
-09: .5220 [13.258]
-10: .5606 [14.239]
(USE K-DOT-.276-.375-.005, SEE FIG 3, SHT 2)
(N/A ON STYLE -07 & -08)
-TR: TAPE & REEL (SEE FIG 13, SHT 7)
(60 POS. MAX)
* = (SEE NOTE 14)
(40 POS. MAX FOR -GP OPTION)
(N/A ON STYLE -05, -06, -07, & -08)
-GP: GUIDE POSTS (SEE FIG 4, SHT 3)
(AVAILABLE ON -01 ONLY)
* = (SEE NOTE 14)
01
"A" REF
.2350 5.969
REF
(USE QTE-20-01-D-XX-GP)
.7875 20.003
(TYP)
(T & R PACK: 40 POS. MAX.)
-SD: SCREW DOWN (SEE FIG 5, SHT 3)
(AVAILABLE ON -01 ONLY)
PLATING SPECIFICATION
-F: 3µ" FLASH GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE T-1SXX-XX-F, T-1G1-XX-F) (SEE NOTE 07)
-L: 10µ" LIGHT GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE T-1SXX-XX-L, T-1G1-XX-L)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(USE T-1SXX-XX-H, T-1G1-XX-G)
-C: 50µ" ELECTRO-POLISHED SELECTIVE IN
CONTACT AREA, MATTE TIN ON TAIL
(USE T-1SXX-XX-C, T-1G1-XX-L)
(USE QTE-20-01-D-XX-SD)
-FL: FRICTION LOCKS (SEE FIG 9, SHT 5)
(ONLY AVAILABLE ON -01 & -02)
(NOT AVAILABLE WITH -GP, -SD)
-RT1: RETENTION OPTION (SEE FIG 11, SHT 6)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(MUST USE -A OPTION)
.155 3.94 REF
(SEE NOTE 13)
02
.6450 16.383
REF
.033 0.84
REF
(USE QTE-20-01-D-XX-A-RT1 & T-1R36-01-F)
(NOT AVAILABLE WITH -LC, -GP, -SD, OR -FL)
(NOT AVAILABLE ON -100 POS)
-L: LATCHING OPTION (40 POS. MAX.)
(SEE FIG 12, SHT 6) (MUST USE -A OPTION)
(AVAILABLE ON -01 ONLY)
19 EQ SPCS
@ .0315 [0.800]
=.599[15.20]
(TYP)
.0080 0.203 REF
-STL: 30µ" HEAVY SELECTIVE GOLD IN
CONTACT AREA, TIN LEAD ON TAIL
(USE T-1SXX-XX-STL, T-1G1-XX-STL)
-FTL: 3µ" FLASH SELECTIVE GOLD IN
CONTACT AREA, TIN LEAD ON TAIL
(USE T-1SXX-XX-FTL, T-1G1-XX-FTL)
(NOT AVAILABLE WITH -LC, -GP, -SD, -FL,
OR -RT1)
QTE-20-XX-D-XX-A
"A"
"C" REF
ROW SPECIFICATION
-D: DOUBLE (USE QTE-20-XX-D-XX
.036 0.91
REF
& QTEH-20-XX-D-XX)
.7450 18.923
T-1G1-XX-XXX
"A"
No OF BANKS
REF
"D" REF
.155±.005 3.937±0.127
(SEE NOTE 13)
T-1SXX-XX-XXX
(SEE TABLE 1)
.080 2.03
REF
SEE TABLE 2
[0.08]
[0.03]
+.003
-.001
"B"
.035 0.90 REF
.280 7.11
.035 0.89 REF
(SEE NOTES 6 & 9)
NOTES:
FIG 1
C
1.
REPRESENTS A CRITICAL DIMENSION.
.015 0.38 REF
-A: ALIGNMENT PIN OPTION
2. MINIMUM TERMINAL RETENTION: 8 OZ.
3. MINIMUM GROUND PLANE RETENTION: 1 LB.
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE OF .002 [0.05].
6. DIMENSION APPLIES TO TERMINALS AND GROUND PLANE.
7. T-1SXX-XX-L CAN BE SUBSTITUTED FOR T-1SXX-XX-F.
8. NOTE DELETED.
(QTE-060-01-XXX-D-A SHOWN)
(STYLE -01, -02 & -03 ONLY)
SECTION "A"-"A"
PROPRIETARY NOTE
*
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
9. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAX HEIGHT
OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS.
10. T-1R36 RETENTION TO BODY TO BE 1.0 LBF.
DECIMALS
ANGLES
.XX: .01 [0.3]
.XXX: .005 [0.13]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
11. NOTE DELETED.
.XXXX: .0020 [0.051]
12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS
NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.
13. PIN CAN EXTEND PAST WALL .003[0.08] MAX.
14. AVAILABLE FOR EXISTING CUSTOMERS ONLY.
15. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT
SAMTEC INTERCONNECT PROCESSING GROUP.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
DESCRIPTION:
.8mm DOUBLE ROW HS TERMINAL ASSEMBLY
INSULATOR: LCP, UL94V-0; COLOR: BLACK
TERMINAL: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
DWG. QTE-XXX-XX-XXX-D-XXX
NO.
BY:
DEAN P
09-14-2010 SHEET 1 OF 7
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-XXX-MKT.SLDDRW
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
