®
R-GAGE QT50R-AFS Sensor
Datasheet
Radar-Based Sensors for Detection of Moving and Stationary Targets
•
•
•
•
FMCW (true-presence) radar detects moving and stationary objects
Higher sensitivity and shorter range
Adjustable sensing field — ignores objects beyond setpoint
Easy setup and configuration of range, sensitivity, and output with simple
DIP switches
•
•
•
Sensing functions are unaffected by wind, falling rain or snow, fog, humidity,
air temperatures, or light
Sensor operates in Industrial, Scientific, and Medical (ISM)
telecommunication band
Rugged IP67 housing withstands harsh environments
Protected by US patents
CAUTION: Make No Modifications to this Product
Any modifications to this product not expressly approved by Banner Engineering could void the user's
authority to operate the product. Contact Banner Engineering for more information.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
Maximum
Range
Supply
Voltage
1
2
Models
Connection
Telecom Approval
Output
Bipolar NPN/PNP
Telecom approved for Europe, UK,
Australia, New Zealand, China, and Japan
5-wire 2 m
(6.5 ft)
Integral cable
QT50R-EU-AFS
QT50R-KR-AFS
12 to 30V dc
12 to 24 V dc
3.75 m
(12.3 ft)
DIP-switch-selectable N.O.
or N.C.
Telecom approved for South Korea
1
Cabled models only are listed. For integral 5-pin Euro-style (M12) quick-disconnect fitting, add suffix "Q" to the model number (for example,
QT50R-xx-AFSQ). QD models require a mating cordset; see Quick Disconnect (QD) Cordsets on page 6.
For additional countries, contact Banner Engineering.
2
Original Document
169603 Rev. E
17 August 2016
169603