®
R-GAGE QT50R-AF2 Sensor
Datasheet
Radar-based dual-zone sensors for detecting moving and stationary targets
•
Fourth generation FMCW (true-presence) radar detects moving and
stationary objects
•
•
Two independent, adjustable sensing zones
Easy setup and configuration of range, sensitivity, and output with simple
DIP switches
•
•
•
Sensing functions are unaffected by wind, falling rain or snow, fog,
humidity, air temperatures, or light
Sensor operates in Industrial, Scientific, and Medical (ISM)
telecommunication band ; no special license required
Rugged IP67 housing withstands harsh environments
Protected by US patents
Maximum
Range
Supply
Voltage
1
2
Models
Connection
Telecom Approval
Output
Telecom approved for US,
Canada and Brazil
QT50R-US-AF2
QT50R-EU-AF2
12 to 30 V dc
Telecom approved for Europe,
UK, Australia, New Zealand,
China, and Japan
DIP-switch-
selectable NPN
or PNP and N.O.
or N.C.
5-wire 2 m (6.5
ft) Integral
cable
24 m (78 feet)
Telecom approved for South
Korea
QT50R-KR-AF2
QT50R-TW-AF2
12 to 24 V dc
12 to 30 V dc
Telecom approved for Taiwan
CAUTION: Make No Modifications to this Product
Any modifications to this product not expressly approved by Banner Engineering could void the user's
authority to operate the product. Contact Banner Engineering for more information.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Overview
The R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of this
emitted energy is reflected back to the receiving antenna. Signal processing electronics determine the distance from the
sensor to the object based on the time delay of the return signal. The sensor can be configured to two independent
sensing zones.
The two sensing zones are factory pre-set to default distances; they can be reconfigured for different distances using the
DIP switches on the back of the sensor. The sensor is plug-in ready for immediate operation.
The sensitivity was pre-calibrated at the factory, assuming that the sensing field will be clear of obstacles. The sensitivity
can be adjusted using the DIP switches on the back of the sensor.
1
Cabled models only are listed. To order the integral 5-pin M12 quick-disconnect fitting, add suffix "Q" to the model number (for
example, QT50R-xx-AF2Q). QD models require a mating cordset; see Quick Disconnect (QD) Cordsets on page 6.
For additional countries, contact Banner Engineering.
2
Original Document
187234 Rev. C
17 August 2016
187234
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
