lQ
QT1106-ISG
QWHEEL™/QSLIDE™/QTOUCH™ IC
"
"
"
"
"
"
"
"
"
"
"
Patented charge-transfer (‘QT’) design
Wheel or Slider plus seven extra keys
QMagic™ proximity effect for ‘approach on’ function
Fast thermal drift tracking
24 23 22
20 19 18 17
21
MOSI
MISO
SNSB2
SNSB3
25
26
27
28
29
30
31
32
16
15
14
13
12
11
10
9
2.8V ~ 5.0V single supply operation
100% autocal for life - no adjustments required
SPI five-wire interface
SNSA
SNSA
SNSA
SNSA1
SNSA2
SNSA3
SNSB
SNSB
SNSB
SNSB
SNSB5
QT1106
32-QFN
Fully debounced results
Patented AKS™ Adjacent Key Suppression
Spread-spectrum bursts for superior noise rejection
RoHS compliant 32-QFN package
1
2
3
4
5
6
7
8
APPLICATIONS
! MP3 players
! Mobile phones
! PC peripherals
! Appliance controls
! Remote controls
QT1106 charge-transfer (‘QT’) QTouchTM IC is a self-contained, patented charge-transfer capacitive controller capable of
detecting near-proximity or touch on up to seven electrodes and a wheel. It allows electrodes to project sense fields through
any dielectric such as glass or plastic. These electrodes are laid out as a scroller (e.g. a wheel or slider) plus seven
additional independent keys. Each key channel can be tuned for a unique sensitivity level by simply changing a corresponding
external Cs capacitor, whereas the wheel/slider’s sensitivity can be changed dynamically through SPI commands.
The wheel/slider uses a simple, inexpensive sensing element between three connection points. The QT1106 can report a
single rapid touch anywhere along the sense elements, or it can track a finger moving along the wheel/slider’s surface in real
time.
The device is designed specifically for human interfaces, like control panels, appliances, gaming devices, lighting controls,
remote controls, or anywhere a mechanical wheel, slider, or switch may be found.
Patented AKS™ Adjacent Key Suppression suppresses touch from weaker responding keys and only allows a dominant key to
detect; for example, to solve the problem of large fingers on tightly spaced keys or buttons in the middle of a wheel.
By using the charge-transfer principle, this device delivers a level of performance clearly superior to older technologies yet
is highly cost-effective. Spread-spectrum burst technology provides superior noise rejection. The device also has a Sync mode
which enables synchronization with additional similar parts and/or to an external source to suppress interference, and low
power modes which conserve power.
AVAILABLE OPTIONS
TA
32-QFN
QT1106-ISG
-400C to +850C
LQ
C
Copyright © 2006 QRG Ltd
QT1106-ISG R8I.05/0906