REVISION AS
QSS-XXX-XX-XXX-D-XXX
No OF POSITIONS
-025, -050, -075,
*-100, *-125
OPTION
-A: ALIGNMENT PINS
DO NOT
SCALE FROM
THIS PRINT
(USE QSS-25-XX-D-XX-A)
(NOT AVAILABLE WITH -LC)
-LC: LOCKING CLIPS (SEE NOTE 12)
(USE LC-08-TM-01, SEE FIG 2, SHT 2)
(NOT AVAILABLE WITH -A)
-K: POLYIMIDE FILM PAD
(USE K-DOT-.325-.450-.005)
(SEE FIG 3, SHT 2)
C
"A" REF
*SEE NOTES 10, 11 & 14
LEAD STYLE
-01: .1430[3.632]
.7875 20.003 (TYP)
.2850 7.239
REF
02
PLATING SPECIFICATION
(SEE NOTES 8 & 11)
-F: 3µ" FLASH SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
(USE C-126-21-F & T-1G2-01-F)
(SEE NOTE 8)
-L: 10µ" LIGHT SELECTIVE GOLD, IN
CONTACT AREA, MATTE TIN ON TAIL
(USE C-126-21-L & T-1G2-01-L)
-H: 30µ" HEAVY GOLD IN CONTACT
AREA, 3µ" GOLD ON TAIL
(USE C-126-21-H & T-1G2-01-G)
-C: 50µ" HEAVY GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE C-126-21-C & T-1G2-01-L)
-STL: 30µ" HEAVY SELECTIVE GOLD IN
CONTACT AREA, TIN LEAD ON TAIL
(USE C-126-21-STL & T-1G2-01-STL)
-FTL: 3µ" FLASH SELECTIVE GOLD IN
CONTACT AREA, TIN LEAD ON TAIL
(USE C-126-21-FTL & T-1G2-01-FTL)
-TR: TAPE & REEL (75 POS MAX)
(50 POS MAX FOR -GP)
-GP: GUIDE POSTS
.2450 6.223
.144 3.66 REF
REF
(USE QSS-25-01-D-XX-X-GP)
(SEE FIG 4, SHT 3)
01
.006 0.15 REF
(NOT AVAILABLE WITH -LS2)
-LS2: LOCKING SCREW
(USE QSS-25-01-D-XX-LS2)
(SEE FIG 5, SHT 3)
.6250 15.875
REF
.0275 0.699
REF
24 EQ SPCS
@ .0250[0.635]
=.600[15.24]
(NOT AVAILABLE WITH -GP)
(FOR MATING WITH
QTS-...-RA-..LS2)
QSS-25-01-D-XX-A
"A"
.135 3.43
REF
ROW SPECIFICATION
-D: DOUBLE (USE QSS-25-XX-D-XX)
.0375 0.953
REF
No OF BANKS
"A"
.7250 18.415 REF
"B" REF
C
.0030 0.076 REF
.017±.005 0.44±0.13
(SEE NOTE 13)
+.003
-.001
+0.08
3.632
-0.03
.1430
T-1G2-01-XXX
+.004
+0.102
4.24
-0.051
.167
(SEE NOTE 6, 7, & 9)
-.002
C
C
SEE TABLE 1
.105 2.65 REF
(SEE NOTE 7 & 9)
C
.035 0.89 REF
.295 7.49
C-126-21-XXX
.064 1.622 REF
.0070 0.178 REF
SECTION "A"-"A"
SCALE 3 : 1
NOTES:
FIG 1
-A: ALIGNMENT PIN OPTION
(QSS-075-01-XXX-D-A SHOWN)
1. MINIMUM CONTACT RETENTION: 6 OZ
2. MINIMUM GROUND PLANE RETENTION: 8 OZ
C
3.
REPRESENTS A CRITICAL DIMENSION.
4. PARTS ARE MOLD TO POSITION.
5. NOTE DELETED.
6. MAXIMUM VARIANCE OF .002[0.05].
* = SEE NOTES 10, 11 & 14
* = SEE NOTES 10, 11 & 14
7. DIMENSION APPLIES TO CONTACTS AND GROUND PLANES, INDEPENDENT OF
GROUND PLANES AND CONTACTS RESPECTIVELY.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES[MM]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
TOLERANCES ARE:
DECIMALS
9. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAX HEIGHT
OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS.
10. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT
SAMTEC INTERCONNECT PROCESSING GROUP.
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
ANGLES
2
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020.051]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
11. FOR -100 AND -125 POSITIONS USE C-269-11-X, DO NOT SUB C-126-01-X.
12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.
13. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS.
14. AVAILABLE FOR EXISTING CUSTOMERS ONLY.
SHEET SCALE: 1.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, UL94V-0; COLOR: BLACK
CONTACT: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
.635mm DOUBLE ROW HS SOCKET ASSEMBLY
DWG. NO.
QSS-XXX-XX-XXX-D-XXX
DEAN P
6/28/1999
SHEET 1 OF 3
BY:
F:\DWG\SW\Exisprod\Assembly\Pt635mm\QSS-XXX-XX-XXX-D-XXX-ASM.SLDDRW
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
