REVISION AZ
QSH-XXX-01-X-D-XXX
No OF POSITIONS
OPTION
-A: ALIGNMENT PINS
-030, -060, -090,
*-120, *-150 (PER ROW)
(* = SEE NOTE 11)
(USE QSH-30-01-D-XX-A)
DO NOT
SCALE FROM
THIS PRINT
(NOT AVAILABLE WITH -LC)
-LC: LOCKING CLIPS
(USE LC-08-TM-01, SEE FIG 2, SHT 2)
(NOT AVAILABLE WITH -A)
LEAD STYLE
-01: .1280[3.25]
(SEE NOTE 13)
-GP: GUIDE POSTS
(USE QSH-30-01-D-XX-X-GP)
(SEE FIG 4, SHT 3)
PLATING SPECIFICATIONF
(SEE NOTES 8, 10 & 12)
C
"A"
(TAPE & REEL FOR -GP, -060 POS MAX)
-K: POLYIMIDE FILM PAD
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE K-DOT-.325-.450-.005, SEE FIG 3, SHT 2)
-TR: TAPE & REEL (-090 POS MAX)
-FL: FRICTION LOCKS
(USE C126-21-S/T-1G2-01-L)
-F: 3µ" FLASH SELECTIVE IN CONTACT AREA,
MATTE TIN ON TAIL
.7875 20.003 (TYP)
(SEE FIG 5, SHT 3)
(USE C126-21-F/T-1G2-01-F)
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION (MUST USE -A OPTION)
(USE QSH-30-01-D-XX-A-RT1
& SUB-SC-05-01-FF, SEE FIG 6, SHT 4)
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
(NOT AVAILABLE WITH -120 & -150 POS)
-L: LATCHING
(SEE NOTE 8)
29 EQ. SPCS
@ .0197 [0.500]
= .571 14.50
(TYP)
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE C126-21-L/T-1G2-01-L)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
02
01
(USE C126-21-H/T-1G2-01-G)
-C: 50µ" ELECTRO-POLISHED SELECTIVE GOLD
IN CONTACT AREA, MATTE TIN ON TAIL
(USE C126-21-C/T-1G2-01-L)
(USE QSH-30-01-D-XX-A-L, SEE FIG 7, SHT 4)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
(NOT AVAILABLE WITH -090, -120, & -150 POS)
.245 6.22
REF
ROW SPECIFICATION
-D: DOUBLE (USE QSH-30-01-D-XX)
.150 3.81 REF
.626 15.89 REF
No OF BANKS
C
.042 1.07
REF
.285 7.24
REF
.006 0.15 REF
.017±.005 0.43±0.13
(SEE NOTE 14)
C-126-21-X
(SEE NOTE 12)
C
+.0030
-.0010
+0.076
-0.025
+.005
-.001
+0.13
4.19
-0.03
.1280
3.251
.165
QSH-30-01-D-XX-A
"A"
"A"
(SEE NOTE 6 & 7)
C
.120 3.05 REF
.038 0.95 REF
SEE TABLE 1
C
.725 18.42 REF
"B" REF
T-1G2-01-X
.007 0.18 REF
.064 1.62 REF
.295 7.49
.105 2.67 REF
SECTION "A"-"A"
SCALE 3 : 1
NOTES:
.035 0.89 REF
C
1.
REPRESENTS A CRITICAL DIMENSION.
FIG 1
2. NOTE DELETED.
-A: ALIGNMENT PIN OPTION
(QSH-090-01-X-D-A SHOWN)
3. CONTACT RETENTION: 8 OZ. MINIMUM.
4. GROUND PLANE RETENTION: 8 OZ. MINIMUM.
5. BURR ALLOWANCE: .0015[0.038] MAX.
6. MAX VARIANCE: .002[0.05].
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
7. DIMENSION APPLIES TO CONTACT & GROUND PLANE.
8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
9. SUB-SC-05-01-XX RETENTION TO BE 1.0 LBF IN BODY.
10. MAY SUB C-126-01 FOR C-126-21.
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
2
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020[.051]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE
CONTACT SAMTEC INTERCONNECT PROCESSING GROUP.
12. FOR -120, -150 POSITIONS USE C-269-11-X. DO NOT SUB C-126.
SHEET SCALE: 3:2
MATERIAL:
DO NOT SCALE DRAWING
13. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
14. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS.
15. SIDE WALLS ARE RIBBED AS NECESSARY TO CONTOL BOW.
.5mm DOUBLE ROW HS SOCKET ASSEMBLY
INSULATOR: LCP UL94V-0, COLOR: BLACK
CONTACT & GROUND PLANE: PHOS BRONZE
DWG. NO.
QSH-XXX-01-X-D-XXX
BY:
DEAN P
05/21/1999 SHEET 1 OF 4
c:\enterprisevault\DWG\MISC\MKTG\QSH-XXX-01-X-D-XXX-MKT.SLDDRW
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
