REVISION AJ
QSH-XXX-XX-X-D-DP-XXX
No OF POSITIONS
OPTION
-A: ALIGNMENT PINS
C
-020, -040, -060,
**-080, **-100
(PER ROW)
DO NOT
SCALE FROM
THIS PRINT
(USE QSH-30-01-D-XX-A,
SEE FIG 2)
-GP: GUIDE POSTS
(USE QSH-30-01-D-XX-GP,
SEE FIG 4)
-LC: LOCKING CLIPS(SEE NOTE 12)
(USE LC-08-TM-01, SEE FIG 1)
-K: POLYIMIDE FILM PAD
(USE K-DOT-.325-.450-.005, SEE FIG. 3)
-TR: TAPE & REEL (60 POS MAX)
-TY: TRAY PACKAGING
{(No OF POS / 20) x .7875[20.003]} + .050[1.27] REF 61.28
9 EQ SPACES @ .059 [1.50] REF
LEAD STYLE
-01: .1280 [3.251]
PLATING SPECIFICATION
(SEE NOTE 11)
-F: 3µ" FLASH SELECTIVE IN CONTACT AREA,
MATTE TIN ON TAIL
(USE T-1G2-01-F) (SEE NOTE 9)
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
.7875 20.00
(TYP)
(NOT AVAILABLE WITH -TR)
-FL: FRICTION LOCKS
(SEE FIG 5, SHEET 3)
02
01
(USE T-1G2-01-L) (SEE NOTE 9)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION (MUST USE -A OPTION)
(USE QSH-30-01-D-XX-A-RT1
& SUB-SC-05-01-FF) (SEE FIG 6, SHEET 3)
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
(NOT AVAILABLE WITH -080 & -100 POS)
-L: LATCHING
(SEE FIG 7, SHEET 4)
(USE QSH-30-01-D-XX-A-L)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
(USE T-1G2-01-G)
.245 6.22
REF
-C: 50µ" ELECTRO-POLISHED SELECTIVE GOLD
IN CONTACT AREA, MATTE TIN ON TAIL
(USE T-1G2-01-L) (SEE NOTE 9)
.659 16.73 REF
'A'
DIFFERENTIAL PAIRS
.036 0.92 REF
.059 1.50 REF
.006 0.15 REF
.285 7.24
REF
C-126-01-X CAN BE SUBBED
FOR C-126-21-X
** = SEE NOTE 10
ROW SPECIFICATION
-D: DOUBLE (USE QSH-30-01-D-XX)
.0197 0.500 REF
.150 3.81 REF
No OF BANKS
.0030 0.08 REF
QSH-30-01-D-XX
C
+.0030
-.0010
+0.076
3.251
-0.025
"A"
C
.1280
.055 1.40
C
(SEE NOTE 2 & 5)
.120 3.05 REF
LC-08-TM-01
SEE TABLE 1
C-126-21-X
* SEE NOTE 11
.064 1.62 REF
.038 0.95 REF
.725 18.42 REF
"A"
.010 0.25
REF
T-1G2-01-X
.056 1.42 REF
.2950 7.493 REF
({(No OF POS / 20) x .7875[20.003]} + .005[.13]) .005[.13]
SECTION "A"-"A"
FIG 1
-LC: LOCKING CLIP OPTION SHOWN
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MAX VARIANCE: .002 [0.05]
3. MAX BURR ALLOWANCE: .0015 [0.038]
4. MINIMUM PUSHOUT FORCE: 4 OZ
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
TOLERANCES ARE:
5. DIM APPLIES TO GROUND PLANE AND CONTACT.
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
6. MINIMUM GROUND PLANE RETENTION: 8 OZ
.XX: .01 [.3]
.XXX: .005 [.13]
7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
8. SUB-SC-05-01-XX RETENTION TO BE 1.0 LBF IN BODY.
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
DESCRIPTION:
9. MAY SUB C-126-01-X for C-126-21-X.
SHEET SCALE: 3:2
MATERIAL:
DO NOT SCALE DRAWING
10. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS PLEASE
CONTACT SAMTEC INTERCONNECT PROCESSING GROUP.
11. FOR -80, -100 POSITIONS USE C-269-11-X. DO NOT SUB C-126.
12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION."
.5mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY
DWG. NO.
INSULATOR: BLACK, LCP
FLAMMABILITY RATING: UL94VO
TERMINAL: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
QSH-XXX-XX-X-D-DP-XXX
SHEET 1 OF 4
BY:
KEVIN B
06/13/00
c:\enterprisevault\DWG\MISC\MKTG\QSH-XXX-XX-X-D-DP-XXX-MKT.SLDDRW
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
