REVISION BL
QSE-XXX-01-XXX-D-XXX
OPTION
No OF POSITIONS
-A: ALIGNMENT PINS
-020, -040, -060
(USE QSE-20-XX-D-XX-A)
(NOT AVAILABLE WITH -LC OPTION)
-LC: LOCKING CLIPS(SEE NOTE 14)
(USE LC-08-TM-01, SEE FIG 2, SHT 2)
(NOT AVAILABLE WITH -A OPTION)
-GP: GUIDE POSTS (SEE FIG 4, SHT 3)
(USE QSE-20-01-D-XX-X-GP)
(T & R PACKAGING: 40 POS MAX)
-K: POLYIMIDE FILM
DO NOT
SCALE FROM
THIS PRINT
*-080, *-100 (PER ROW)
(*= SEE NOTE 17)
LEAD STYLE
-01: .1280[3.251]
(*= SEE NOTE 17)
(*= SEE NOTE 17)
PLATING SPECIFICATION
(USE K-DOT-.325-.450-.005)
(SEE FIG 3, SHT 2)
C
(SEE NOTES 8, 11 & 13)
-TR: TAPE & REEL (60 POS MAX)
(SEE FIG 8, SHT 5)
-F: 3µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
"A" REF
(40 POS MAX -GP OPTION)
-FL: FRICTION LOCKS
(USE C-126-21-F, T-1G2-01-F)
(SEE NOTE 8)
.7875 20.003 (TYP)
(SEE FIG 5, SHT 3)
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION OPTION
(MUST USE -A OPTION)
19 EQ. SPCS
@ .0315 [0.800]
=.599[15.20]
(TYP)
.285 7.24
REF
(USE C-126-21-L, T-1G2-01-L)
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(USE QSE-20-01-D-XX-A-RT1 &
SUB-SC-05-01-FF)
(SEE FIG 6, SHT 4)
(USE C-126-21-H, T-1G2-01-G)
-C: 50µ" ELECTRO POLISHED SELECTIVE
GOLD IN CONTACT AREA,
02
.150 3.81
REF
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
(NOT AVAILABLE WITH -100 POS)
-L: LATCHING OPTION (40 POS MAX)
(SEE FIG 7, SHT 4)
MATTE TIN ON TAIL
.245 6.22
REF
(USE C-126-21-C, T-1G2-01-L)
-STL: 30µ" SELECTIVE GOLD IN CONTACT
AREA, TIN LEAD (90/10 ±5%) ON TAIL
(USE C-126-21-STL, T-1G2-01-STL)
-FTL: 3µ" SELECTIVE GOLD INCONTACT
AREA, TIN LEAD (90/10 ±5%) ON TAIL
(USE C-126-21-FTL, T-1G2-01-FTL)
-LTL: 10µ" SELECTIVE GOLD IN CONTACT
AREA, TIN LEAD (90/10 ±5%) ON TAIL
(USE C-126-21-LTL, T-1G2-01-LTL)
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(MUST USE -A OPTION)
(NOT AVAILABLE WITH -LC, -GP, -FL,
OR -RT1)
01
.6250 15.875
REF
.0975 2.477
REF
ROW SPECIFICATION
-D: DOUBLE
(USE QSE-20-XX-D-XX)
.0225 0.571
REF
(USE C-126-21-S, T-1G2-01-L)
No OF BANKS
QSE-20-01-D-XX-A
SEE NOTE 15
"A"
.017±.005 0.43±0.13
(SEE NOTE 16)
.120 3.05
REF
.038 0.95
REF
"A"
.725 18.42
REF
.0030 0.076 REF
"B" REF
C
+.0030
-.0010
+0.076
3.251
-0.025
.1280
+.004
-.002
+0.10
4.24
-0.05
.167
(SEE NOTE 6 & 7)
T-1G2-01-XXX
C
.105 2.67
REF
C
L
SEE TABLE 1
C
.064 1.62 REF
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
.035 0.89 REF
2. MINIMUM CONTACT RETENTION: 8 OZ
3. MINIMUM GROUND PLANE RETENTION: 8 OZ
4. PARTS ARE MOLDED TO POSITION.
5. DELETED.
.007 0.18 REF
C-126-21-XXX
(SEE NOTE 13)
6. MAXIMUM VARIANCE: .002[0.51].
7. DIMENSION APPLIES TO CONTACTS & GROUND PLANE.
FIG 1
SECTION "A"-"A"
-A: ALIGNMENT PIN OPTION
(QSE-060-01-XXX-D-A SHOWN)
8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING, -G PLATED GROUND
PLANE CAN BE SUBSTITUTED FOR -F PLATED GROUND PLANE.
9. GROUND PLANE PRESS HEIGHT MUST BE .003 [0.08] LESS THAN THE MAX HEIGHT
OR .001 [0.03] GREATER THAN THE MINIMUM HEIGHT OF THE SOCKETS.
10. MINIMUM SUB-SC-05-01-XX RETENTION: 1 LB IN BODY.
11. MAY SUB C-126-01-XXX FOR C-126-21-XXX.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
2
12. NOTE DELETED.
.XX: .01[.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
13. FOR -080, -100 POSITIONS USE C-269-11-XXX. DO NOT SUB C-126.
14. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT.SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
15. SIDE WALLS ARE RIBBED AS NECESSARY TO CONTROL BOW.
16. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS.
17. AVAILABLE FOR EXISTING CUSTOMERS ONLY.
.XXX: .005[.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
.XXXX: .0020[.051]
e-Mail info@SAMTEC.com
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
DESCRIPTION:
INSULATOR: LCP, UL94V-0; COLOR: BLACK
CONTACT: PHOS BRONZE
.8mm DOUBLE ROW HS SOCKET ASSEMBLY
DWG. NO.
GROUND PLANE: PHOS BRONZE
QSE-XXX-01-XXX-D-XXX
18. NOTE DELETED.
BY:
ERIC M
05/20/1999 SHEET 1 OF 5
F:\DWG\MISC\MKTG\QSE-XXX-01-XXX-D-XXX-MKT.SLDDRW
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
