APPLICABLE STANDARD UL,CSA,TÜV
Operating
Storage
Temperature Range
Operating
-10 ℃ to 60 ℃
-10 ℃ to 60 ℃
95 % max
―
Temperature Range
Rating Voltage
Current
(Note 1)
(Note 1)
Humidity Range
Applicable Wire
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
ELECTRIC CHARACTERISTICS
Insulation Resistance
500 V DC.
5000 MΩ min.
X
X
X
X
Voltage Proof
(Note 2)
Power contact
No flashover or breakdown.
1000 V AC. for 1 min.
Signal contact
500 V AC. for 1 min.
MECHANICAL CHARACTERISTICS
Mating and Unmating Forces Measured with an applicable connector.
Mating force :29.4 N max.
X
X
X
-
-
-
Unmating force :29.4 N max.
Vibration
Shock
Frequency : 10 to 55 Hz, single amplitude 0.75 mm,
at 2 h each in 3 axial directions.
490 m/s2 duration of pulse 11 ms for 3 times
No damage, crack and looseness of parts.
in 3 both axial directions.
ENVIRONMENTAL CHARACTERISTICS
Rapid Change of Temperature Temperature – 55 → 5 to 35 → 85 → 5 to 35 ℃
No damage, crack and looseness of parts.
1) Insulation resistance :
Time
30 → 2 to 3 → 30 → 2 to 3 min
-
X
Under 5 cycles.
Humidity Life
Exposed at 25 to 65 ℃, 93 ± 3 %, 240 h.
1
MΩ min. (at high humidity.)
X
X
-
-
3000 MΩ min. (at dry.)
2) No damage, crack and looseness of parts.
No heavy corrosion that lose function.
Corrosion Salt Mist
Exposed in 5 % salt water spray for 48 h.
COUNT
0
REMARK
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
APPROVED
CHECKED
DESIGNED
DRAWN
TU.TANIGUCHI
TU.TANIGUCHI
TS.ITO
20181126
20181126
20181126
20181122
(Note 1) Rated voltage and current are shown in customer’s drawing.
(Note 2) 1000 V AC for contact No. 1, 12, 13, 24. 500 V AC for others.
Unless otherwise specified, refer to IEC 60512.
SJ.SATO
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
ELC-020655-21-00
QR/P1-24S-C(21)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CODE NO.
CL221-0113-4-21
FORM HD0011-2-1