APPLICABLE STANDARD UL, CSA, TÜV
Operating
Temperature Range
Storage
Temperature Range
Operating
-10℃ to 60℃
-
Voltage
Rating
(Note 1)
(Note 1)
-
-
Humidity Range
Applicable Wire
Current
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to the drawing.
X
X
X
X
Marking
ELECTRIC CHARACTERISTICS
Insulation Resistance
500 V DC.
5000 MΩ min.
X
X
X
X
Voltage Proof
(Note 2)
Power contact
1000 V AC. for 1 min.
Signal contact
No flashover or breakdown.
500 V AC. for 1 min.
MECHANICAL CHARACTERISTICS
Mating and Unmating
Forces
Measured with an applicable connector.
Mating force : 14.7 N max.
Unating force : 14.7 N max.
X
X
X
-
-
-
Vibration
Frequency : 10 to 55 Hz, single amplitude 0.75 mm, No damage, crack and looseness of parts.
at 2 h each in 3 axial directions.
Shock
490 m/s2 duration of pulse 11 ms for 3 times
in 3 both axial directions.
ENVIRONMENTAL CHARACTERISTICS
Rapid Change of
Temperature
No damage, crack and looseness of parts.
X
X
X
-
-
-
Temperature
-55 → 5 to 35 → 85 → 5 to 35 C
Time
30 → 2 to 3 → 30 → 2 to 3 min.
Under 5 cycles.
Humidity Life
1)Insulation resistance
Exposed at 25 to 65 ℃, 93 ± 3 %, 240 h.
1 MΩ min (at high humidity)
3000 MΩ min (at dry)
2) No damage, crack and looseness of parts.
Corrosion Salt Mist
Exposed in 5 % salt water spray for 48 h.
No heavy corrosion that lose function.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
TU.TANIGUCHI
TU.TANIGUCHI
TS.ITO
20181126
20181126
20181126
20181122
(Note 1) Rated voltage and current are shown in customer’s drawing.
(Note 2) 1000V AC for contact No. 1, 7. 500V AC for others
Unless otherwise specified, refer to IEC 60512.
SJ.SATO
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
ELC-010173-21-00
QR/P1-12P-C(21)
DRAWING NO.
PART NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1
CODE NO.
0
1/1
CL221-0100-2-21
△