QPM2100
2.5 –ꢀ4.0ꢀGHz Multi-Chip T/R Module
Product Description
The QPM2100 is a GaAs multi chip module (MCM)
designed for S-Band radar applications within the 2.5-4.0
GHz range. The device consists of a T/R switch, a transmit
path which is a low loss pass through, and a receive path
consists of a low-noise amplifier, a digital attenuator and
a driver amplifier. The receive path offers 30 dB of small
signal gain and 1.2 dB noise figure. It includes a 6 bit
digital step attenuator (DSA) with 31.5 dB gain control
range. It can deliver 14.5 dBm of power at P1dB with 34
dBm of output TOI. All functional MMIC blocks can be
enabled or DC powered off with internal control circuitry.
All control signals use CMOS compatible logic. The
response time of signal control is less than 15 nS.
The QPM2100 chips are fabricated on Qorvo's GaAs
0.25um process. The 7 x 7 OVM QFN surface mount
package, coupled with a proprietary die-attach process,
allows the QPM2100 to perform well at extreme
temperature ambient. Its compact size supports tight
lattice spacing requirements needed for S - Band phased
array radar applications.
Functional Block Diagram
Product Features
• Frequency Range: 2.5ꢀ–ꢀ4.0ꢀGHz
• RX Noise Figure: 1.2 dB
• RX Small Signal Gain: 30 dB
• RX Power at 1dB compression: 14.5 dBm
• RX OTOI : 34 dBm
• 6 Bit DSA Attenuation Range: 31.5 dB
• TX insertion loss: 1.2 dB
• Fast switching time: < 15 nS
• No need of negative bias
• Package Dimensions: OVM 7 x 7 x 0.8 mm
Performance is typical at room temperature.
Please reference electrical specification table and data
plots for more details.
Applications
Ordering Information
• Electronics Warfare (EW)
• Commercial and Military Radar
• Communications
Part No.
Description
QPM2100SR
Tape and Reel, Qty 100
QPM2100EVB02 QPM2100 Evaluation Board
Data Sheet Rev. A June 10, 2020
|
Subject to change without notice
- 1 of 17 -
www.qorvo.com