QPL9096
Ultra Low-Noise, Bypass LNA
®
General Description
The QPL9096 is a high-linearity, ultra-low noise gain block
amplifier with a bypass mode functionality integrated in the
product. At 2.5ꢀGHz, the amplifier typically provides 25 dB
gain, +33.5 dBm OIP3, and 0.75 dB noise figure while
drawing 60 mA current from a +4.2ꢀV supply.
8 Pin 2X2 mm DFN Package
The QPL9096 is internally matched using a high
performance E-pHEMT process and only requires four
external components for operation from a single positive
supply: an external RF choke and blocking/bypass
capacitors. This low noise amplifier contains an internal
active bias to maintain high performance over temperature.
Product Features
1.7 – 2.7 GHz Operational bandwidth
LNA with integrated bypass mode
Ability to turn LNA and bypass mode OFF
Ultra low noise, 0.75 dB at 2.5ꢀGHz
25 dB Gain at 2.5ꢀGHz
+33.5 dBm Output IP3 in LNA Mode
+40 dBm Input IP3 in Bypass Mode
Internally matched
The QPL9096 is optimized for the 1.7ꢀ–ꢀ2.7 GHz frequency
band and is targeted for wireless infrastructure. The
QPL9096 is packaged in a 2ꢀxꢀ2ꢀmm DFN.
Positive supply only, +3.3 to +5ꢀV
2x2 mm 8-pin DFN plastic package
Functional Block Diagram
Applications
Base-station Receivers
Repeaters / DAS
Pin 1 Reference Mark
Tower Mounted Amplifiers
Mobile Infrastructure
General Purpose Wireless
TDD or FDD systems
1
2
3
4
8
7
6
5
GND
RF In
N/C
VDD
RF Out
GND
VSD
VBYP
Backside Paddle - RF/DC GND
Top View
Ordering Information
Part No.
QPL9096SR
Description
100 pcs on 7” reel
QPL9096TR7
2500 pcs on 7” reel
QPL9096EVB01(1)
Evaluation Board
1. Refer board details and performance on pgs. 3 & 4.
1 of 10
Data Sheet July 5, 2017 | Subject to change without notice
www.qorvo.com