QPF4588A
Wi-Fi 6 Front End Module
®
Product Overview
The Qorvo® QPF4588A is an integrated medium power front
end module (FEM) designed for Wi-Fi 6 (802.11ax) systems.
The small form factor and integrated matching minimizes layout
area in the application.
Performance is focused on optimizing the PA for a 5V supply
voltage, while providing optional operation over a wide range,
that conserves power consumption while maintaining the
highest linear output power and leading edge throughput.
Receive path matches the optimal technologies to maximize Rx
sensitivity through noise figure performance that is consistent
over a wider variety of conditions.
24 Pad 5 x 3 mm Laminate Package
Integrated die level filtering for 2nd and 3rd harmonics as well
as 2.4 GHz rejection for DBDC operation are included. For
application feedback, an RF power detector is integrated in the
package providing a coupled signal from the transmit path.
Key Features
• 5150ꢀ–ꢀ5850ꢀMHz
• POUT = +17dBm MCS11 HE160 -43dB Dynamic EVM
• POUT = +19dBm MCS11 HE80 -43dB Dynamic EVM
• POUT = +23.5dBm MCS9 VHT80/160 -35dB Dynamic EVM
• POUT = +27dBm MCS0 VHT20 Spectral Mask Compliance
• Optimized for +5 V Operation
The QPF4588A integrates a 5 GHz power amplifier (PA), single
pole two throw switch (SP2T) and bypassable low noise
amplifier (LNA) into a single device.
• 33ꢀdB Tx Gain
• 2 dB Noise Figure
Functional Block Diagram
• 14 dB Rx Gain & 8 dB Bypass Loss
• 23 dB 2.4 GHz Rejection on Rx Path
• Integrated RF Power Detector
Applications
• Access Points
• Wireless Routers
• Residential Gateways
• Customer Premise Equipment
• Internet of Things
Ordering Information
Top View
Part Number
QPF4588ASB
QPF4588ASR
QPF4588ATR13
QPF4588AEVB
Description
Sample bag with 5 pieces
7” reel with 100 pieces
13” reel with 10,000 pieces
Assembled Evaluation Board
Data Sheet Brief Rev A, November 2020
1 of 2
www.qorvo.com
Subject to change without notice | All rights reserved