QPA9119
½ W High Linearity Amplifier
®
Product Overview
The QPA9119 is a high linearity driver amplifier in a low-
cost, RoHS compliant, surface mount package. This
InGaP/GaAs HBT delivers high performance across a
broad range of frequencies with +44ꢁdBm OIP3 and
+27.2ꢁdBm P1dB while only consuming 130ꢁmA quiescent
current. All devices are 100% RF and DC tested.
16 Pad 3ꢀxꢀ3ꢀmm QFN Package
The QPA9119 incorporates on-chip features that
differentiate it from other products in the market. The
amplifier integrates an on-chip DC over-voltage and RF
over-drive protection. This protects the amplifier from
electrical DC voltage surges and high input RF input power
levels that may occur in a system. On-chip ESD protection
allows the amplifier to have a very robust Class 1C HBM
ESD rating.
Key Features
• 400ꢁ–ꢁ4200ꢁMHz
• +27.2 dBm P1dB
• +44ꢁdBm Output IP3
• 17ꢁdB Gain at 2140ꢁMHz
• +5ꢁV Single Supply, ICQ =130ꢁmA
• Internal RF Overdrive Protection
• Internal DC Overvoltage Protection
• On Chip ESD Protection
• 3ꢁxꢁ3ꢁmm QFN Package
The QPA9119 is targeted for use as a driver amplifier in
wireless infrastructure where high linearity, medium power,
and high efficiency are required. The device an excellent
candidate for transceiver line cards in current and next
generation multi-carrier 3G / 4G base stations.
Applications
Functional Block Diagram
• Repeaters / DAS
• Mobile Infrastructure
• Defense Communications
• General Purpose Wireless
Pin 1 Reference Mark
5
6
7
8
N/C
RF In
RF In
N/C
1
2
3
4
12 N/C
BIAS
11 RF Out
10 RF Out
9
N/C
5
6
7
8
Ordering Information
Backside Paddle - RF/DC GND
Top View
Part No.
Description
QPA9119
2,500 pieces on a 7” reel (standard)
869ꢁ–ꢁ960ꢀMHz Evaluation Board
2110ꢁ–2170ꢀMHz Evaluation Board
QPA9119ꢁ-ꢁPCB900
QPA9119ꢁ-ꢁPCB2140
Data Sheet, April 26, 2021 | Subject to change without notice
1 of 14
www.qorvo.com