QFS-XXX-XX.XX-XX-D-XX-XXX
No OF POSITIONS
END OPTIONS
-026, -052, -078, -104, *-130
-PC4: 4 POWER POS PER END (.062" THICK BOARD)
C
C
(PER ROW)
(SEE FIG. 3, SHEET 3)
-PC8: 8 POWER POS PER END (.062" THICK BOARD)
(SEE FIG. 3, SHEET 3)
((No OF POS / 26) x .840[21.34] + .040[1.02] REF
(No OF POS / 26) x .8400[21.336]) - .2150[5.461]
LEAD STYLE
-04.25
-06.25
**-PT4: 4 POWER POS PER END (.093" THICK BOARD)
(SEE FIG. 3, SHEET 3)
**-PT8: 8 POWER POS PER END (.093" THICK BOARD)
(SEE FIG. 3, SHEET 3)
PLATING SPECIFICATION
-L: LIGHT GOLD
.083 2.10
REF
-RF1: 1 RF POS PER END
.8400 21.336 (TYP)
(SEE FIG. 5, SHEET 4)
(USE C-XXX-XX.XX-L, SEE TABLE 7)
(AVAILABLE ON -04.25 LEAD STYLE ONLY)
-H: HEAVY GOLD
-RF2: 2 RF POS PER END
.1075 2.731
C
(SEE FIG. 6, SHEET 4)
-RT1: 1 RT POS PER END
(USE C-XXX-XX.XX-H, SEE TABLE 7)
(AVAILABLE ON -04.25 LEAD STYLE ONLY)
25 EQ SPACES @ .0250[.635]
(SEE FIG. 7, SHEET 5)
-S: SELECTIVE GOLD
02
-P: PICK AND PLACE PAD
(USE PPP-51, SEE FIG. 4, SHEET 2)
(USE C-XXX-XX.XX-S, SEE TABLE 7)
(AVAILABLE ON -06.25 LEAD STYLE ONLY)
-SL: SELECTIVE LIGHT GOLD
"A"
(-PXX & -RFX NOT AVAILABLE IN
COMBINATION WITH -A OR -GP)
(END OPTION APPLIES TO BOTH
ENDS, COMBINATIONS ARE
NOT AVAILABLE)
(-PXX & -RFX AVAILABLE IN POS
-026, -052, & -078 ONLY)
(-RT1 AVAILABLE IN -026, -052,
-078, & -104 POS WITH -A
OPTION ONLY)
(-PXX, -RFX, & -RT1 AVAILABLE
ON -04.25 LEAD STYLE ONLY)
(USE C-XXX-XX.XX-SL, SEE TABLE 7)
(AVAILABLE ON -06.25 LEAD STYLE ONLY)
.320 8.13
REF
ROW SPECIFICATION
-D: DOUBLE
OPTION
"A"
-A: ALIGNMENT PIN
-GP: GUIDE POSTS
01
.009 0.23 REF
(SEE FIG. 2, SHEET 2)
(AVAILABLE ON -04.25 LEAD
STYLE ONLY)
C
* = NOT TOOLED
.0040 0.102
"N"
REF
C
.134 3.40
T-1G2X-XX.XX-L
(SEE TABLE 7)
(MEASURED CONTACT
TO CONTACT)
.040 1.02 REF
.035 0.89 REF
((No OF POS / 26) x .840[21.34]) - .030[0.76] REF
C
QFSS-26-XX.XX-D-02-A
(SEE TABLE 7)
.004[0.10]
.002[0.05]
"M"
(SEE NOTES 5, 6, & 7)
C
SEE TABLE 1
(SEE NOTE 6)
C-XXX-XX.XX-XX
(SEE TABLE 7)
.051 1.30 REF
.320±.006 8.13±0.15
FIG. 1
SECTION "A"-"A"
SCALE 5 : 1
QFS-052-04.25-X-D-A SHOWN
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
SEE NOTE 4
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
C
.XXX: .005 [.13]
2. BURR ALLOWANCE: .0015[0.038] MAX.
.XXXX: .0020 [.051]
3. MINIMUM PUSHOUT FORCE: SIGNAL: .5 LB, GROUND: 1 LB, POWER: .5 LB, RF: .5 LB.
4. ALL CONTACTS ON THE -04.25 LEAD STYLE WILL BE SHEARED.
5. MAX VARIANCE OF .002[0.05].
6. DIMENSION APPLIES TO CONTACTS & GROUND PLANE.
7. GROUND PLANE PRESS HEIGHT MUST BE .003 [.08] LESS THAN THE MAX HEIGHT
OR .001 [.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINAL.
8. PARTS TO BE PACKAGED IN TRAYS.
SHEET SCALE: 2.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, COLOR: BLACK
CONTACTS & GROUND PLANE:
PHOS BRONZE
.635mm DOUBLE ROW TERMINAL STRIP
QFNSO-. XXX-XX.XX-XX-D-XX-XXX
DWG.
SHEET 1 OF 5
BY:
E.L.S.
6/09/2003
F:\DWG\MISC\MKTG\QFS-XXX-XX.XX-XX-D-XX-XXX-MKT.SLDDRW
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
