QD48T033050 DC-DC Converter Data Sheet
36-75 VDC Input; 3.3VDC @ 15A and 5.0VDC @ 10A Outputs
The QD48T033050 dual output through-hole mounted
DC-DC converter offers unprecedented performance in a
quarter brick package by providing two independently regu-
lated high current outputs with total power of 100 W. This is
accomplished by the use of patent pending circuit and pack-
aging techniques to achieve ultra-high efficiency, excellent
thermal performance and a very low body profile.
In telecommunications applications the QD48 converters
provide up to 15 A @ 3.3 V and 10 A @ 5 V simultaneously
– with thermal performance far exceeding existing dual quar-
ter bricks and comparable to dual half-bricks. Low body pro-
file and the preclusion of heatsinks minimize airflow shadow-
ing, thus enhancing cooling for downstream devices. The
use of 100% surface-mount technologies for assembly, cou-
pled with Power-One’s advanced electric and thermal cir-
cuitry and packaging, results in a product with extremely
high quality and reliability.
QD48T033050 Converter
Features
•
•
RoHS lead-free solder and lead-solder-exempted
products are available
Delivers simultaneously up to 15 A on 3.3 VDC and up
to 10 A on 5.0 VDC output
Can replace two single output quarter-bricks
Minimal cross-channel interference
High efficiency: 88% @ full load, 89% @ half load
Starts-up into pre-biased output
No minimum load required
No heat sink required
Low profile: 0.28” [7.2 mm]
Low weight: 1 oz [28 g] typical
Industry-standard footprint: 1.45” x 2.30”
Industry-standard pinout
Meets Basic Insulation Requirements of EN60950
Withstands 100 V input transient for 100ms
On-board LC input filter
110
100
90
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
80
70
60
50
500 LFM (2.5 m/s)
400 LFM (2.0 m/s)
40
300 LFM (1.5 m/s)
200 LFM (1.0 m/s)
30
100 LFM (0.5 m/s)
20
10
0
30 LFM (0.15 m/s)
20
30
40
50
60
70
80
90
Ambient Temperature [°C]
Fixed-frequency operation
Fully protected
Fig. 1: Available output power vs. ambient air temperature and
airflow rates for QD48T033050 converter mounted vertically with air
flowing from pin 3 to pin 1, MOSFET temperature ≤ 120°C, Vin =
48 V and balanced load on both outputs (Iout1 = 1.5·Iout2).
Output voltage trim range: ±10% for both outputs
Trim resistor via industry-standard equations
High reliability: MTBF 2.6 million hours, calculated per
Telcordia TR-332, Method I Case 1
Positive or negative logic ON/OFF option
UL 60950 recognized in U.S. & Canada, and certified
per IEC/EN 60950
Meets conducted emissions requirements of FCC
Class B and EN55022 Class B with external filter
All materials meet UL94, V-0 flammability rating
•
•
Applications
•
•
•
•
Telecommunications
Data communications
Wireless
•
•
Servers
MCD10083 Rev. 1.0, 24-Sep-08
Page 1 of 16
www.power-one.com