Q45BW13 Series Sensors
Datasheet
Universal voltage photoelectric sensors with isolated solid-state output
•
Advanced one-piece photoelectric sensors with outstanding opꢀcal performance and
extremely rugged design
•
•
•
Universal supply voltage: 12 V dc to 250 V dc or 24 V ac to 250 V ac
Opto-isolated solid-state relay output; 300 mA max. load at up to 250 V ac, 250 V dc
Full line includes opposed, diffuse, retroreꢁecꢀve, convergent, and glass and plasꢀc fiber
opꢀc sensing modes
Selectable light/dark operate
•
•
•
•
Versaꢀle plug-in modules available for output ꢀming logic and/or signal strength display
1
™
Highly visible Power, Signal (AID System ), and Output indicator LEDs
Choice of prewired 2 m (6.5 ꢂ) or 9 m (30 ꢂ) unterminated cable or Mini-style quick-
disconnect fiꢃng
•
•
Versaꢀle mounꢀng opꢀons
Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 raꢀng
WARNING: Not To Be Used for Personnel Protecꢀon
Never use this device as a sensing device for personnel protecꢀon. Doing so could lead to serious injury or
death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel
safety applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output
condiꢀon.
Models
To order the 9 m (30 ꢂ) cable models, add the suffix "W/30" to the cabled model number. For example: Q453E W/30.
Models with a quick disconnect (QD) connector require a maꢀng cable.
Opposed Mode Emiꢁer (E) and Receiver (R) Models
Because of their extremely high excess gain, these opposed-mode sensors are an excellent opꢀon for sensing in
contaminated or dirty areas, and are also the best choice for long-range sensing.
OPPOSED
Infrared, 880 nm
Models
Range
Cable
Supply Voltage
Output Type
Q453E Emiꢁer
2-wire 2 m (6.5 ꢂ)
4-wire 2 m (6.5 ꢂ)
3-pin Mini QD
4-pin Mini QD
Universal 12 to 250 V dc
Q45BW13R Receiver
Q453EQ Emiꢁer
Q45BW13RQ Receiver
60 m (200 ꢂ)
Isolated SPST Solid-state Switch
or
24 to 250 V ac
Retroreꢂecꢀve Mode Models
The visible red sensing beam of these sensors makes them very easy to align. Model Q45BW13LP
polarizes the emiꢄed light and filters out unwanted reꢁecꢀons, making sensing possible in
applicaꢀons otherwise considered unsuited to retroreꢁecꢀve sensing. Performance is specified
using the model BRT-3 3-inch reꢁector (go to www.bannerengineering.com for more
informaꢀon).
P
RETRO
POLAR RETRO
Visible red, 680 nm
(non-polarized)
Visible red, 680 nm
(polarized)
Retroreꢁecꢀve range is specified using one model BRT-3 retroreꢁector (3-inch diameter). Actual sensing range may be more or less than
specified, depending upon the efficiency and reꢁecꢀve area of the retroreꢁector used.
1
U.S. Patent number 4356393
Original Document
53999 Rev. D
31 January 2017
53999
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
