Q2D Series – Quarter-Brick DC/DC Converter
48V Input
Data Sheet
Dual Output
Features
•
•
•
Independent outputs of any combination of
voltages from 1.2V to 5.0V
Simultaneously delivers 15A per output from
1.2V to 3.3V; 10A for 5V output
Extremely low-profile (<8mm or 0.30”) single-
board design. No heatsink required.
Light Weight: 28 g ( 1.00 oz)
Surface mount and through-hole versions
High efficiency
No minimum load required on either output
Starts-up into pre-biased outputs
Meets transient withstand requirements of
Bellcore GR-513
•
•
•
•
•
•
Applications
• Distributed power architectures
• Telecommunications equipment
• LAN/WAN applications
•
•
Fixed frequency operation
Remote on/off (primary referenced), positive
or negative logic
Output voltage trim. ± 10% for each output
Output overcurrent protection
Output overvoltage protection
•
•
•
•
• Data processing applications
Overtemperature protection
Description
The new Q2D series of dual output DC/DC converters offer unprecedented density and performance in an
industry standard, quarter-brick footprint. Patent pending technology and state-of-the-art packaging
techniques achieve a total of 30A (25A for 5V output) output current, 15A (10A for 5V output) per channel,
without a heatsink. Extremely low profile (<8mm or 0.30”) enables the converters to be used in applications
where spacing between circuit boards is limited. The 100% surface-mount design provides consistent high
quality and reliability. The SMT mounting option eliminates the need for separate (additional manual)
process in attaching the converters to the motherboards during mass production.
Location of the Thermocouple for Thermal Testing.
Rev. JUN 06, 2002
Page 1 of 13