Q24S25033 DC-DC Converter Data Sheet
18-36 VDC Input; 3.3 VDC @ 25A Output
Description
The Q24S25033 surface mounted DC-DC converter offers
unprecedented performance in an industry-standard
quarter-brick format. This is accomplished through the use of
patent pending circuit and packaging techniques to achieve
ultra-high efficiency, excellent thermal performance and a
very low body profile.
In telecommunications applications theQFamily 25 A con-
verters provide thermal performance that far exceeds all
quarter bricks and is comparable even to existing half-bricks.
Low body profile and the preclusion of heat sinks minimize
airflow shadowing, thus enhancing cooling for downstream
devices. The use of 100% surface-mount technologies for
assembly, coupled with Power-One’s advanced electric and
thermal circuitry and packaging, results in a product with
extremely high quality and reliability.
Q24S25033 Converter
Features
RoHS lead-free solder and lead-solder-exempted
products are available
Delivers up to 25 A
Higher current capability at 70 ºC than existing
quarter-brick and half-brick converters
High efficiency: 88.5% @ 25 A, 88.5% @ 12.5 A
Start-up into pre-biased output
No minimum load required
No heat sink required
Low profile: 0.26” [6.6 mm]
Low weight: 1 oz [28 g] typical
Industry-standard footprint: 1.45” x 2.30”
Meets Basic Insulation Requirements of EN60950
On-board LC input filter
Fixed-frequency operation
Fully protected
30
25
20
15
500 LFM (2.5 m/s)
400 LFM (2.0 m/s)
10
5
300 LFM (1.5 m/s)
200 LFM (1.0 m/s)
100 LFM (0.5 m/s)
30 LFM (0.15 m/s)
0
20
30
40
50
60
70
80
90
Ambient Temperature [°C]
Remote output sense
Fig. 1: Available load current vs. ambient air temperature and air-
flow rates for Q24S25033 converter mounted vertically with air flow-
ing from pin 3 to pin 1, MOSFET temperature 120C, Vin = 27 V.
Output voltage trim range: +10%/-20%
Trim resistor via industry-standard equations
High reliability: MTBF 2.6 million hours, calculated per
Telcordia TR-332, Method I Case 1
Positive or negative logic ON/OFF option
UL 60950 recognized in U.S. & Canada, and DEMKO
certified per IEC/EN 60950
Meets conducted emissions requirements of FCC
Class B and EN55022 Class B with external filter
All materials meet UL94, V-0 flammability rating
Applications
Telecommunications
Data communications
Wireless
Servers
MCD10216 Rev. 1.0, 23-Aug-10
Page 1 of 14
www.power-one.com