PWE_D-6W & PWF_D-6W Series
6W, 4:1 WIDE INPUT, ISOLATED & REGULATED
SINGLE/DUAL OUTPUT DIP DC/DC CONVERTER
multi-country patent protection RoHS
FEATURES
PRODUCT PROGRAM
High Efficiency up to 86%
Input
Output
Part
Number
Efficiency
(%, Typ)
Operating Temperature: -40°C to +85°C
3KVDC Input/Output Isolation
Short Circuit Protection(Automatic recovery)
Internal SMD construction
No Heat Sink Required
Industry Standard Pinout
MTBF>1,000,000 hours
RoHS Compliance
Voltage (VDC)
Current (mA)
Max
Voltage
(VDC)
Nominal Range Max*
Min
±60
±25
±20
±13
150
120
50
PWE2405D-6W
PWE 2412D-6W
PWE 2415D-6W
PWE 2424D-6W
PWF2403D-6W
PWF2405D-6W
PWF2412D-6W
PWF2415D-6W
PWF2424D-6W
PWE4805D-6W
PWE4812D-6W
PWE4815D-6W
PWE4824D-6W
PWF4803D-6W
PWF4805D-6W
PWF4812D-6W
PWF4815D-6W
PWF4824D-6W
±5
±12
±15
±24
3.3
5
±600
±250
±200
±125
1500
1200
500
80
83
85
86
78
80
83
85
86
80
83
85
86
78
80
84
85
86
24
9-36
40
12
15
400
40
APPLICATIONS
24
250
25
The PWE_D-6W & PWF_D-6W Series are
specially designed for applications where a wide
range input voltage power supplies are isolated
from the input power supply in a distributed power
supply system on a circuit board.
±5
±600
±250
±200
±125
1500
1200
500
±60
±25
±20
±13
150
120
50
±12
±15
±24
3.3
5
These products apply to:
48
18-72
80
1) Where the voltage of the input power supply
is wide range (voltage range≤ 4:1);
12
2) Where isolation is necessary between input
and output (Isolation Voltage≤3000VDC);
3) Where the regulation of the output voltage
and the output ripple noise are demanded.
15
400
40
24
250
25
*Input voltage can’t exceed this value, or will cause the permanent damage.
Note: The load shouldn't be less than 10%, otherwise ripple will increase dramatically.
Operation under 10% load will not damage the converter; However, they may not meet all specification listed.
OUTPUT SPECIFICATIONS
MODEL SELECTION
PWE2405D-6W
Item
Test Conditions
Min
0.6
Typ
Max Units
Output Power
See below products program
Refer to recommended circuit
Refer to recommended circuit
From 10% to 100% load
6
±3
W
Rated Power
Package Style
Output Voltage
Positive Voltage accuracy
Negative Voltage accuracy
Load Regulation
±1
±3
±5
Input Voltage
%
±0.5
±0.2
0.02
20
±2*
±0.5
Product Series
Line Regulation(at full load) Input voltage from low to high
Temperature Drift(Vout)
Ripple**
Refer to recommended circuit
20MHz bandwidth
%/°C
mVp-p
KHz
50
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Noise**
20MHz bandwidth
75
150
Switching Frequency
100% load, nominal input voltage
300
Tel: 86-20-38601850
*Dual output models unbalanced load: ±5%
Fax: 86-20-38601272
Http://www.mornsun-power.com
**Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter section, application notes.
MORNSUN reserves the copyright
Specifications subject to change without notice
PWE_D-6W & PWF_D-6W
A/1-2008
Page 1 of 2