PTV12020
12 Vin sin gle ou t put
DC-DC CONVERTERS POLA Non-isolated
1
NEW Product
• 16 A output current
• 12 V input voltage
• Wide-output voltage adjust
• 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and
0.8 Vdc to 1.8 Vdc for suffix ‘L’
• Auto-track™ sequencing*
• Pre-bias start-up
• Efficiencies up to 93%
• Output ON/OFF inhibit
• Vertical through-hole mounting
• Point-of-Load-Alliance (POLA) compatible
• Undervoltage lockout
• Available RoHS compliant
The PTV12020 is a non-isolated dc-dc converter from Artesyn under the Point of Load
Alliance (POLA) standard. The vertical mounting option of the PTV12020 module provides
performance in less than 20% of the space that is required by alternative solutions. The
Auto-Track™ feature provides for sequencing between multiple modules, a function,
which is becoming a necessity for powering advanced silicon including DSP’s, FPGA’s
and ASIC’s requiring controlled power-up and power-down. The PTV12020 has an input
voltage of 10.8 Vdc to 13.2 Vdc and offers a wide 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and
0.8 Vdc to 1.8 Vdc for suffix ‘L’ output voltage range with up to 16 A output current,
which allows for maximum design flexibility and a pathway for future upgrades.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
Cin = 560 µF (non-ceramic) and 22 µF (ceramic), Cout = 0 µF
SPECIFICATIONS
OUTPUT SPECIFICATIONS
EMC CHARACTERISTICS
Voltage adjustability
(See Note 4)
Suffix ‘W’
1.2-5.5 Vdc
0.8-1.8 Vdc
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
Suffix ‘L’
EN61000-4-6
EN61000-4-3
Setpoint accuracy
Line regulation
(See Note 8)
±2.0% Vo
GENERAL SPECIFICATIONS
Efficiency
Suffix ‘W’
Suffix ‘L’
±5 mV typ.
±10 mV typ.
See Tables on page 2
Non-isolated
Load regulation
Suffix ‘W’
Suffix ‘L’
±10 mV typ.
±12 mV typ.
Insulation voltage
Switching frequency
Suffix ‘W’
Suffix ‘L’
Total regulation
Minimum load
(See Note 8)
±3.0% Vo
0 A
250-400 kHz
200-300 kHz
325 kHz typ.
250 kHz typ.
Approvals and
standards
EN60950
Ripple and noise
Suffix ‘W’ V <2.5 V
o
1.0% V
o
UL/cUL60950
20 MHz bandwidth
Suffix ‘W’ V >2.5 V
o
1.5% V
o
Suffix ‘L’
2.0% V
o
Material flammability
Dimensions
UL94V-0
Temperature co-efficient -40 ºC to +85 ºC
±0.5% Vo
(L x W x H)
44.45 x 9.39 x 12.70 mm
1.75 x 0.37 x 0.50 in
Transient response
(See Note 5)
70 µs recovery time
Overshoot/undershoot 100 mV
Weight
MTBF
5.5 g (0.19 oz)
INPUT SPECIFICATIONS
Input voltage range
Input standby current
Remote ON/OFF
Telcordia SR-332
4,900,000 hours
(See Note 3)
10.8-13.2 Vdc
10 mA typ.
Positive logic
9.5 V typ.
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 2)
Operating ambient,
-40 ºC to +85 ºC
-40 ºC to +125 ºC
temperature
(See Note 1)
Non-operating
Undervoltage lockout
Track input current
(Increasing)
PROTECTION
Overcurrent
Pin 9 (See Notes 6, 7)
0.13 mA
Auto reset
30 A typ.
Overtemperature
Auto recovery
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950
File No. E174104
*Auto-track™ is a trade mark of
Texas Instruments
TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044
CB Report and Certificate to IEC60950, Certificate No.
US/8292/UL
File Name: ptv12020w.pdf Rev (02): 19 Dec 2005