PTH08080W
www.ti.com
SLTS235A–FEBRUARY 2005–REVISED MARCH 2005
2.25-A, WIDE-INPUT ADJUSTABLE SWITCHING REGULATOR
FEATURES
•
•
•
Ambient Temperature Range: –40°C to 85°C
•
•
•
Up to 2.25-A Output Current at 85°C
Surface-Mount Package
4.5-V to 18-V Input Voltage Range
Safety Agency Approvals:
UL/CUL 60950, EN60950 VDE (Pending)
Wide-Output Voltage Adjust
(0.9 V to 5.5 V)
APPLICATIONS
•
•
•
•
Efficiencies Up To 93%
On/Off Inhibit
•
Telecommunications, Instumentation,
and General-Purpose Circuits
Undervoltage Lockout (UVLO)
Output Overcurrent Protection
(Nonlatching, Auto-Reset)
•
Overtemperature Protection
DESCRIPTION
The PTH08080W is a highly integrated, low-cost switching regulator module that delivers up to 2.25 A of output
current. The PTH08080W sources output current at a much higher efficiency than a TO-220 linear regulator IC,
thereby eliminating the need for a heat sink. Its small size (0.5 × 0.6 in) and flexible operation creates value for a
variety of applications.
The input voltage range of the PTH08080W is from 4.5 V to 18 V, allowing operation from either a 5-V or 12-V
input bus. Using state-of-the-art switched-mode power-conversion technology, the PTH08080W can step down to
voltages as low as 0.9 V from a 5-V input bus, with less than 1 W of power dissipation. The output voltage can
be adjusted to any voltage over the range, 0.9 V to 5.5 V, using a single external resistor. Operating features
include an undervoltage lockout (UVLO), on/off inhibit, overcurrent protection, and overtemperature protection.
Target applications include telecommunications, test and measurement applications, and high-end consumer
products. This product is available in both through-hole and surface-mount package options, including tape and
reel.
$
D1
STANDARD APPLICATION
Inhibit
5
4
R
#
SET
0.05 W, 1%
(Required)
PTH08080W
(Top View )
V
O
V
I
1
3
C
*
O
C *
I
2
+
100 mF
100 mF
Electrolytic
(Required)
Electrolytic
(Optional)
GND
GND
* See The Capacitor Application Information
# See the Specification Table for the R
SET
value.
$ Diode is Required When V > 5.25 V and V > 16 V.
I
O
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.