PTH08000W
www.ti.com
SLTS248–JUNE 2005
2.25-A, WIDE INPUT, ADJUSTABLE SWITCHING REGULATOR
WITH AUTO-TRACK™ SEQUENCING
FEATURES
•
•
Surface-Mount Package
Safety Agency Approvals:
UL/CUL 60950, EN60950 VDE (Pending)
•
•
•
Up to 2.25-A Output Current at 85°C
4.5-V to 14-V Input Voltage Range
Wide-Output Voltage Adjust
(0.9 V to 5.5 V)
APPLICATIONS
•
Telecommunications, Instrumentation,
and General-Purpose Circuits
•
•
•
•
Efficiencies Up to 94%
On/Off Inhibit
Undervoltage Lockout (UVLO)
Output Overcurrent Protection
(Nonlatching, Auto-Reset)
•
•
Overtemperature Protection
Ambient Temperature Range: –40°C to 85°C
DESCRIPTION
The PTH08000W is a highly integrated, low-cost switching regulator module that delivers up to 2.25 A of output
current. The PTH08000W sources output current at a much higher efficiency than a TO-220 linear regulator IC,
eliminating the need for a heatsink. The small size (0.75 inch × 0.5 inch) and flexible operation creates value for
a variety of applications.
The input voltage range of the PTH08000W is 4.5 V to 14 V, allowing operation from either a 5-V or 12-V input
bus. Using state-of-the-art switched-mode power-conversion technology, the PTH08000W can step down to
voltages as low as 0.9 V from a 5-V input bus, with less than 1 W of power dissipation. The output voltage can
be adjusted to any voltage over the range, 0.9 V to 5.5 V, using a single external resistor. This series includes
Auto-Track™ sequencing. This feature simplifies the task of supply voltage sequencing in a power system by
enabling modules to track each other, or any external voltage, during power up and power down. Operating
features include an undervoltage lockout (UVLO), on/off inhibit, overcurrent protection, and overtemperature
protection. Target applications include telecommunications, test and measurement applications, and high-end
consumer products. This product is available in both through-hole and surface-mount package options, including
tape and reel. The PTH08000W is compatible with TI's roadmap for RoHS and lead-free compliance.
STANDARD APPLICATION
V
O
1
2
3
4
6
Track
PTH08000W
(Top View)
V
I
C *
O
+
C *
I
5
+
100 µF
100 µF
(Optional)
(Required)
R
#
Inhibit
SET
1%, 0.05 W
(Required)
GND
GND
* See the Application Information section for capacitor recommendations.
# See the Application Information section for R values.
SET
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Auto-Track, POLA, TMS320 are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.