PT4115E
50V/1.5A Step-down High Brightness
LED Driver
GENERAL DESCRIPTION
FEATURES
Simple low parts count
Wide input voltage range: 6V to 50V
High efficiency (up to 97%)
Up to 1.5A output current
Single pin on/off and brightness control using DC
voltage or PWM
Up to 1MHz switching frequency
Typical 3% output current accuracy
Inherent open-circuit LED protection
Inherent Rcs open protection
High-Side Current Sense
Hysteretic Control: No need compensation
Adjustable Constant LED Current
Thermal shutdown
The PT4115E is a continuous conduction mode
inductive step-down converter, designed for driving
single or multiple series connected LED efficiently
from a voltage source higher than the total LED chain
voltage. The device operates from an input supply
between 6V and 50V and provides an externally
adjustable output current of up to 1.5A.
The PT4115E includes the power switch and a
high-side output current sensing circuit, which uses an
external resistor to set the nominal average output
current, and a dedicated DIM input accepts either a DC
voltage or a wide range of pulsed dimming. Applying a
voltage of 0.3V or lower to the DIM pin turns the
output off and switches the device into a low current
standby state.
APPLICATIONS
Low voltage halogen replacement LEDs
Automotive lighting
Low voltage industrial lighting
LED back-up lighting
Illuminated signs
The PT4115E is available in SOT89-5 package.
SELV lighting
LCD TV backlighting
ORDERING INFORMATION
TEMPERATURE ORDERING PART
TRANSPORT
MEDIA
PACKAGE
MARKING
RANGE
NUMBER
PT4115E
xxxxxX
Tape and Reel
1000 units
SOT89-5
-40 oC to 85 oC
PT4115EE89E
Note:
xxxxxX
Assembly Factory Code
Lot Number
TYPICAL APPLICATION CIRCUIT
RS
DC6-50V
VIN
LED
L
D
CIN
AC12-24V
VIN
CSN
SW
DIM
PT4115E
GND
CR POWTECH (SHANGHAI) CO., LTD.
PT4115E_DS_Rev EN 1.0
WWW.CRPOWTECH.COM
Page 1