PSPRL0602N SERIES
220~400 Watts, AC/DC Switching Power
Supplies
Rev B
U-Chassis
U-Chassis with Vented Top Cover Enclosed with End-Side Built-in Fan Enclosed with Top-Side Built-in Fan
Size: 6.00 x 4.00 x 1.50 in
Size: 6.00 x 4.00 x 1.57 in
Size: 7.01 x 4.00 x 1.60 in
Size: 6.00 x 4.00 x 2.15 in
FEATURES
• RoHS Compliant
• Built-in Remote On/Off, Power Good, and Fan Fail Alarm Functions
• Peak Power 700W within 500µs Duty Duration
• High Quality & Reliable Component Usage
• Variable Fan Speed & Low Acoustical Noise
• 90~264VAC Full Range Input
• 220 Watts with Convection Cooling and 400 Watts with Forced Airflow
• Short Circuit, Over Power, Over Voltage, and Over Temperature Protection
• MTBF: 100,000 Hours (MIL-HDBK-217F)
• 1U Height Power Density: 11.11 Watts /cu in
• Single Outputs Ranging from 12VDC to 60VDC
• UL1950, CSA C22.2 No. 950-95, EN60950, and CB Safety Approvals
• Active Power Factor Corrected to EN61000-3-2 Class D • Four Mechanical Options Available
DESCRIPTION
The PSPRL0602N series of AC/DC switching power supplies offers 220 Watts of output power with convection cooling and 400 Watts with
forced airflow. This series consists of single output models ranging from 12VDC to 60VDC. These models have a 90~264VAC input voltage
range, active PFC corrected to EN61000-3-2 Class D, and built-in remote on/off, power good, and fan fail alarm functions. These supplies
are also protected against short circuit, over voltage, over power, and over temperature conditions. Models are available in U-chassis (Type
U), U-chassis with vented top cover (Type C), enclosed with end-side built-in fan (Type E), and enclosed with top-side built-in fan (Type F)
designs. This series is RoHS compliant and has UL1950, CSA C22.2 No. 950-95, EN60950, and CB safety approvals.
MODEL SELECTION TABLE
Output Voltage (2)
Range
Output Current (3)
Output Power (3)
Convection Forced Air
Regulation
Ripple & Noise (5)
Model Number (1) Input Voltage
(6)
(6)
Preset Convection Forced Air
PSPRL0602Nx-12
PSPRL0602Nx-15
PSPRL0602Nx-18
10 ~ 13.8 VDC 12 VDC
14 ~ 15.5 VDC 15 VDC
18.33A
14.67A
12.22A
9.17A
7.86A
6.11A
4.58A
4.07A
33.33A
26.67A
22.22A
16.67A
14.29A
11.11A
8.33A
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
220W
220W
220W
220W
220W
220W
220W
220W
400W
400W
400W
400W
400W
400W
400W
400W
1%
1%
1%
1%
1%
1%
1%
1%
16 ~ 20 VDC
21 ~ 26 VDC
27 ~ 34 VDC
35 ~ 42 VDC
43 ~ 50 VDC
51 ~ 60 VDC
18 VDC
24 VDC
28 VDC
36 VDC
48 VDC
54 VDC
PSPRL0602Nx-24
90 - 264 VAC
PSPRL0602Nx-28
PSPRL0602Nx-36
PSPRL0602Nx-48
PSPRL0602Nx-54
NOTES
7.41A
1. The “x” in the model number can be “U” for U-chassis type, “C” for U-chassis with vented top cover type, “E” for enclosed with end-side built-in fan, or “F”
for enclosed with top-side built-in fan.
2. All output ranges are covered by agency certifications and the preset voltage will be set as standard models if nothing different is requested. If desired
preset output does not appear, please contact factory.
3. PSPRL0602NU-XX Models (U-chassis): 220W max. with convection cooling and 400W max. with 26.84CFM minimum forced airflow.
PSPRL0602NC-XX Models (U-chassis with vented top cover): 220W max. with convection cooling.
PSPRL0602NE-XX Models (Enclosed with end-side built-in fan): 400W max. with built-in fan airflow.
PSPRL0602NF-XX Models (Enclosed with top-side built-in fan): 400W max. with built-in fan airflow.
4. Provides peak power to 700W within 500µs for all models; for longer duty duration please contact manufacturer.
5. Ripple and noise are measured from 10kHz to 20MHz bandwidth and with a 0.1µF ceramic capacitor and a 22µF electrolytic capacitor in parallel across
the output.
6. 1% minimum load is required to maintain the ripple and regulation specifications.
7. Output is fully isolated.
8. This product is Listed to applicable standards and requirements by UL.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/3/2019
Page 1 of 8