PSPRL0602D SERIES
220~400 Watts
AC/DC Active PFC Switching Power Supply
Dual Output
Rev D
F Type
E Type
C Type
U Type
Size: 6” x 4” x 2” inches
Size: 7” x 4” x 1.6”
Size: 6” x 4” x 1.57”
Size: 6” x 4” x 1.5”
OPTIONS
• Case Type
• Output Voltage
FEATURES
• Compact 400W with 1U height power density: 11.11 watts/cu in • RoHS Compliant
• Built-in Remote On/Off, Power Good, Fan Fail Alarm
• 5/12/24/48VDC Dual Output Optional Combinations
• Power Factor Corrected to EN61000-3-2 class D
• Variable Fan Speed & Low Acoustical Noise
• High Quality & Reliable Component Usage
• UL, CUL, TUV, CB, and CE approvals
• Input Fusing, Over Power, Short Circuit, Over Voltage, and Over • 4-Mechanical Options
Temperature Protection
• Full Range AC Input
DESCRIPTION
The PSPRL0602D series of AC/DC switching power supplies have a dual output, universal input, and output power up to 400 watts. Models are
available in U-Chassis (U Type), U-Chassis with a top cover (C Type), Enclosed with rear side built-in fan (E Type), and Enclosed with top built-in
fan (F Type) designs. Output connectors are Howder terminal block design. Optional Mating Molex 16 pin outputs are also available. Please
contact factory for ordering details.
MODEL SELECTION TABLE
Max. Output Current
Maximum Output Power(3)
C, U Type U, E, F Type
(Convention) (Forced Air)
Input Voltage Output
Ripple &
Noise(2)
Model Number(1)
Regulation
Efficiency
C, U Type
(Convention) (Forced Air)
E, F, U Type
Range
Voltage
V1
V2
V1
V2
V1
V2
V1
V2
+5VDC
+12VDC
+5VDC
+24VDC
+5VDC
+48VDC
+12VDC
+24VDC
15A
10.42A
15A
5.2A
15A
2.6A
12.5A
6.25A
30A
16.67A
30A
8.33A
30A
4.16A
16.67A
8.33A
PSPRL0602Dx-0512
PSPRL0602Dx-0524
PSPRL0602Dx-0548
PSPRL0602Dx-1224
90~264VAC
90~264VAC
90~264VAC
90~264VAC
1%
1%
1%
1%
±5%
±5%
±5%
±5%
180W Max.
180W Max.
180W Max.
200W Max.
320W Max.
320W Max.
320W Max.
400W Max.
75% Min.
75% Min.
75% Min.
75% Min.
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
Input Voltage Range
Input Current
TEST CONDITIONS
Min
Typ
Max
264
Unit
Full Range
@90VAC
90
VAC
A
8
@230VAC, Cold start
@115VAC, Cold start
@Vin: 230VAC, Full Load
70
35
Inrush Current
A
Power Factor Correction
OUTPUT SPECIFICATIONS
Output Voltage
Regulation
Adjustability
0.9
±5
See Table
±5
%
%
Output User Adjustable
Remote On-Off
Output Power
Designated as INH on pin4 of CN1, requires a low signal to inhibit output
See Table
See Table
1
Output Current
Ripple & Noise(2)
%
Returns to within 1% in less than 2.5mS for a 50% load change and the peak
transient does not excess 5%
Transient Response
Turn On Delay
Hold Up Time
Overshoot
@120VAC
1.5
Sec
Msec
@120VAC and 75% of rated maximum load
Turn-On & Off Overshoot <5% over nominal voltage.
16
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
7/23/2019
Page 1 of 5