PSAQC100 SERIES
85~100 Watts, AC/DC Switching Power Supplies
Rev D
FEATURES
• RoHS Compliant
• Active PFC Function: > 0.95 (230VAC) and >0.99
(115VAC)
• Class I and Class II Construction
• 3000VAC I/O Isolation
• 12V, 15V, 24V, and 48V Single Output Models
• PCB Mountable Switching Power Supply
• Universal Input Voltage Range: 90-264VAC (120-370VDC)
• Short Circuit, Over Power, and Over Voltage Protection
• Four M3 Mounting Holes on Bottom Side (Optional)
• Meets EN55022 Class B
• 85~100 Watts Output Power
• High Efficiency up to 93%
• Fully Encapsulated Plastic Case
• Low Leakage Current < 250µA
• Remote ON/OFF Control
• Optional Screw Terminal
• UL/cUL 60950-1,CE, and CB Safety Approvals
Size:
Weight:
4.29 x 2.30 x 1.18 inches 10.93oz (310g)
109.0 x 58.5 x 30.0 mm
DESCRIPTION
The PSAQC100 series of AC/DC power supplies provides up to 100 watts of output power in a 4.3” x
2.30” x 1.18” encapsulated PCB mountable package. This series consists of single output models with
a universal input range of 90-264VAC (120-370VDC). Some features include remote ON/OFF control,
low leakage current < 250µA, active PFC function, 3000VAC I/O isolation, and high efficiency up to
93%. This series is also protected against over power, over voltage, and short circuit conditions. All
models are RoHS compliant and have UL/cUL 60950-1, CE, and CB safety approvals and meet
EN55022 Class B.
MODEL SELECTION TABLE
Output Current
Min Load (1) (2) Max Load
Input Voltage
Model Number
Output
Voltage
Maximum
Capacitive Load
Ripple & Noise (3) Output Power Efficiency
Range
PSAQC100-12S
12 VDC
15 VDC
24 VDC
48 VDC
3%
3%
3%
3%
7.08A
5.66A
4.2A
120mVp-p
150mVp-p
200mVp-p
240mVp-p
85W
85W
90%
90%
92%
93%
50,000µF
40,000µF
6,000µF
560µF
PSAQC100-15S
90~264 VAC
(120~370 VDC)
PSAQC100-24S
100W
100W
PSAQC100-48S
2.1A
NOTES
1. A minimum loading on the output is required to maintain all specified regulations. Operation under no-load conditions will not damage these
devices; however, they may not meet all listed specifications.
2. The minimum load increases by 0.16% for every 1°C drop in temperature (at input = 90~219VAC)
3. Ripple & noise is measured at 20MHz bandwidth, full load, and with 47µF and 0.1µF capacitors in parallel across the output.
4. It is necessary to add a Varistor 14S471K in parallel on the L/N input side and a 10R/Ø15 Thermistor in series on the L input side.
5. Screw terminal mechanical options available. Please call factory for ordering details.
6. This product is Listed to applicable standards and requirements by UL.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/23/2019
Page 1 of 8