PSAHC Series
5 Watt Single Output
Encapsulated PCB Mount
AC/DC Switching Power Supply
FEATURES
● High Efficiency
● 2 Year Warranty
● CE, UL Approval
● Regulated Output
● Low Ripple and Noise
● Fully Encapsulated Plastic Case
● Universal Input Range: 90~264VAC
● Switching Power Module for PCB Mounting
SPECIFICATIONS: PSAHC Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
90 ~ 264VAC or 120 ~ 370 VDC
47 ~ 440Hz
Input Current (Full Load)
Inrush Current (< 2ms)
Leakage Current
110mA max @ 115VAC, 70mA max @ 230VAC
10A max @ 115VAC, 20A max @ 230VAC
0.75mA max
OUTPUT SPECIFICATIONS
Output Voltage
Output Power Range
Voltage Accuracy
See Table
See Table
±2%
Line Regulation (LL – HL)
Load Regulation (5% to 100%)
Output Current
±0.3% typical
±0.5% typical
See Table
< 0.2% Vout +40mV max.
< 0.5% Vout +50mV max.
0%
Ripple (Vp-p)
Noise (Vp-p)
Minimum Load
Maximum Capacitive Load
Hold Up Time
Temperature Coefficient
PROTECTION
Over Power Protection
Over Voltage Protection
Short Circuit Protection
External Fuse Recommendation for Input
GENERAL SPECIFICATIONS
Switching Frequency
Efficiency
Isolation Voltage (Input to Output)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Humidity
Cooling
MTBF
470-23,000µF depending on model.
15ms min.
±0.02%/°C
Hiccup technique, auto-recovery
Zener diode clamp
Hiccup mode, indefinite (automatic recovery)
1.5A slow blow type
132KHz
See Table
3000VAC
-25°C to +70°C (with derating)
-40°C to +85°C
95% RH
Free air convection
> 360,000 hours @ 25°C (MIL-HDBK-217F)
PHYSICAL SPECIFICATIONS
Case Material
Plastic resin with Fiberglass (flammability to UL 94V-0)
Weight
30g
Dimensions
2.0(L) x 1.0(W) x 0.597(H) inches (50.8(L) x 25.4(W) x 15.16(H) mm) Tolerance ±0.5mm
SAFETY & EMC
Agency Approvals
UL/cUL, CE
EMI (Conducted & Radiated Emission)
EMS (Noise Immunity)
EN 55022 class B
EN 55024
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797