PSAEC60 SERIES
60 Watts
Rev F
AC/DC Encapsulated PCB Mount Power Supplies
FEATURES
• 5VDC to 48VDC Single Outputs • Universal Input Voltage Range: 90-264VAC (120-
370VDC)
• 4000VAC I/O Isolation
• Up to 60 Watts Output Power
• High Efficiency up to 86%
• Fully Encapsulated Plastic Case
• ±10% Output Trim
• Short Circuit, Over Power, and Over Voltage Protection
• -40°C to +70°C Operating Temperature Range
• Four M3 Mounting Holes on Bottom Side
• CE & UL Safety Approvals for Standard Case and A2
Model
• PCB Mountable Switching Power
Supply
• Two Screw Terminal Options Available
DESCRIPTION
The PSAEC60 series of AC/DC power supplies provides up to 60 watts of output power in a
4.3” x 2.30” x 1.18” encapsulated PCB mountable package. This series consists of single
output models with a universal input range of 90-264VAC (120-370VDC). Some features
include 4000VAC I/O isolation, -40°C to +70°C operating temperature range, ±10% output
trim, and efficiency up to 86%. This series is also protected against over power, over voltage,
and short circuit conditions. The standard case and A2 model types have CE & UL safety
approvals. This series also has two types of screw terminal options available.
Size:
Weight:
10.93oz (310g)
4.3 x 2.30 x 1.18 inches
109.0 x 58.5 x 30.0 mm
MODEL SELECTION TABLE
Output Current (1)
Ripple & Noise (2)
Output
Voltage
Output
Power
Maximum
Capacitive Load
Model Number Input Voltage
PSAEC60-5S
Efficiency
Min Load Max Load
Ripple
Noise
5 VDC
9 VDC
12 VDC
15 VDC
24 VDC
48 VDC
100mA
66.6mA
50mA
10A
6.66A
5A
50mVp-p
58mVp-p
75mVp-p
95mVp-p
50W
60W
60W
60W
60W
60W
82%
84%
86%
86%
86%
86%
80,000µF
28,000µF
14,000µF
12,000µF
4000µF
PSAEC60-9S
PSAEC60-12S
PSAEC60-15S
PSAEC60-24S
90~264 VAC
64mVp-p 110mVp-p
70mVp-p 125mVp-p
88mVp-p 170mVp-p
136mVp-p 290mVp-p
(120~370
VDC)
40mA
4A
25mA
12.5mA
2.5A
1.25A
PSAEC60-48S
950µF
TECHNICAL SPECIFICATIONS: PSAEC60 SERIES
All specifications are based on 25°C After Warm-Up, Nominal Input Voltage, and Full Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
AC input voltage range
DC input voltage range
90
120
47
264
370
63
2.0
1.0
30
VAC
VDC
Hz
Input Voltage
Input Frequency
Input Current
At 115VAC and full load
At 230VAC and full load
At 115VAC and cold start
At 230VAC and cold start
A
A
Inrush Current (<2ms)
50
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Output Trim
Line Regulation
Load Regulation
Output Power
See Table
-2
-10
-1
+2
+10
+1
%
%
%
%
See page 4
Low Line to High Line
5% - 100% full load
-1
+1
See Table
See Table
Output Current
Minimum Load
1
%
Ripple
Noise
Measured at 20MHz bandwidth, full load, and with 47µF
and 0.1µF capacitors in parallel across the output
< 0.2% Vout + 40mV max
< 0.5% Vout + 50mV max
See Table
mVp-p
mVp-p
Ripple & Noise
Max Capacitive Load
Hold-up Time
10
ms
Temperature Coefficient
PROTECTION
-0.02
+0.02
%/°C
Short Circuit Protection
Over Voltage Protection
Over Power Protection
Auto-recovery
Zener diode clamp
Auto-recovery
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
4/8/2022
Page 1 of 5