PSAE1500 SERIES
Rev B
Wall Industries, Inc.
1500 Watts, AC/DC Switching Power Supplies
FEATURES
• RoHS Compliant
• Remote Sensing Multiple PSU via RS232, RS485 & I2C
• Programmable Output Voltage (0~105%)
• PFC > 0.95 at 230VAC
• Up to 1502 Watts Output Power
• High Efficiency up to 93%
• 3000VAC (4242VDC) I/O Isolation
• Constant Current Limiting
• Global Control via RS232
• Power OK Signal
• Programmable Output Current (0~105%)
• Remote ON/OFF, Remote Sense Functions
• Universal Input Voltage Range: 90~264VAC (127~370VDC)
• Single Outputs Ranging from 12VDC to 60VDC
• Selectable +5V/0.5A or +9V/0.3A Auxiliary Output
• Forced Current Sharing at Parallel Operation
• UL 60950-1 and EN60950-1 Safety Approvals
• Protection: OLP, OVP, OTP, Fan Failure
DESCRIPTION
Size:
The PSAE1500 series of AC/DC switching power supplies provides up to 1502 Watts of output power in a
11.02” x 5.00” x 2.50” enclosed case. This series consists of single output models ranging from 12VDC to
60VDC with a universal input voltage range of 90~264VAC (127~370VDC). Standard features include high
efficiency up to 93%, PFC > 0.95 at 230VAC, programmable output voltage and output current, remote
on/off, remote sense, and power OK signal. This series also has over temperature, over voltage, and over
load protection. All models are RoHS compliant and have UL 60950-1 and EN60950-1 safety approvals.
11.02 x 5.00 x 2.50 inches
(280.0 x 127.0 x 63.5 mm)
Weight:
5.73 lbs (2.6kg)
MODEL SELECTION TABLE
Model Number Input Voltage (2) Output Voltage Output Current Line Regulation Load Regulation Output Power Ripple & Noise (1) Efficiency
PSAE-1500-12
PSAE-1500-15
PSAE-1500-24
PSAE-1500-30
PSAE-1500-36
PSAE-1500-48
PSAE-1500-60
NOTES
12 VDC
15 VDC
24 VDC
30 VDC
36 VDC
48 VDC
60 VDC
125A
100A
62.5A
50A
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1500W
1500W
1500W
1500W
1501W
1502W
1500W
120mVp-p
150mVp-p
240mVp-p
300mVp-p
360mVp-p
480mVp-p
600mVp-p
89%
90%
92%
92%
92%
92%
93%
90~264 VAC
(127~370 VDC)
41.7A
31.3A
25A
1. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair-wire terminated with a 0.1µF & 47µF capacitors in parallel.
2. For voltages near the low end of the input voltage range, see the derating curve for the power supply output rating.
3. When in parallel operation only one unit might operate if the total output load is less than 5% of the rated load condition.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
DERATING CURVES
Load vs Ambient Temperature
Load vs Input Voltage
120
120
Ta=25°C
100
90
80
70
60
50
40
100
80
60
40
20
-25
0
10
20
30
40
50
60
70
80
90
264
100
110
120
Ambient Temperature (°C)
Input Voltage (VAC)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/14/2013
Page 1 of 8