Technical Specification
Half
48V 12V
13.8A
out
in
Brick
165 Watt, No Heatsink, Isolated DC/DC Converter
™
The PQ60120HTA14 PowerQor Tera converter
is a next-generation, board-mountable, isolated,
fixed switching frequency DC/DC converter that uses
synchronous rectification toachieve extremely high
conversion efficiency. The power dissipated by the
converter is so low that a heatsink is not required,
which saves cost, weight, height, and application effort.
The Tera series converters offer the maximum useable
output current for any standard “half-brick” module.
The Tera units also feature active current sharing for
N+1 and parallel applications.
PQ60120HTA14 Module
Operational Features
Protection Features
• Ultra-high efficiency, 93% at full rated load current
• Input under-voltage lockout disables converter at
low input voltage conditions
• Delivers up to 165 Watts of output power with mini-
mal derating - no heatsink required
• Output current limit and short circuit protection
• Wide input voltage range: 35V – 75V, with 100V
100ms input voltage transient capability
• Active back bias limit prevents damage to convert-
er from external load induced pre-bias
• Fixed frequency switching provides predictable EMI
• Output over-voltage protection
• Thermal shutdown
performance
Mechanical Features
Control Features
• Industry standard half-brick pin-out configuration
• Industry standard size: 2.3” x 2.4” (58.4 x 61.0mm)
• On/Off control referenced to input side (positive
and negative logic options are available)
• Remote sense for the output voltage compensates
• Total height only 0.43” (11.2mm), permits better air-
for output distribution drops
flow and smaller card pitch
• Output voltage trim permits custom voltages and
voltage margining
• Total weight: 2.6 oz. (75 grams)
Safety Features
Optional Features (Full-Feature modules)
• 2000V, 30 MΩ input-to-output isolation
• Active current share for N+1 and parallel applications
• UL/cUL 60950 recognized (US & Canada), basic
• External Clock Synchronization pin for better EMI
insulation rating
characteristics
• TUV certified to EN60950
• Meets 72/23/EEC and 93/68/EEC directives
• Meets UL94V-0 flammability requirements
• Startup Synchronization pin for more consistent start-
up sequence
• ORing FET drive supply for efficient ORing protection
Product # PQ60120HTA14
Phone 1-888-567-9596
Doc.# 005-2HT612F Rev. D
9/9/04
Page 1