Technical
Specification
PQ60012SMx25
35-75V
100V
Transient Input
1.2V
Output
30W
Max Power
2250V dc
Sixteenth-Brick
Input
Isolation
DC-DC Converter
The PQ60012SMx25 PowerQor® Mega sixteenth brick
converter is a next-generation, board-mountable, isolated,
fixed switching frequency DC/DC converter that uses
synchronous rectification to achieve extremely high
conversion efficiency. The power dissipated by the converter
is so low that a heatsink is not required, which saves cost,
weight, height, and application effort. All of the power and
control components are mounted to the multi-layer PCB
substrate with high-yield surface mount technology. Since
the PowerQor converter has no explicit thermal interfaces, it
is extremely reliable. RoHS compliant (see page 15).
Operational Features
• High efficiency, 80% at full rated load current
• Delivers up to 30W of output power with minimal derating
• Operating input voltage range: 35-75V
PQ60012SML25
Module
• Fixed frequency switching provides predictable EMI
• No minimum load requirement
Protection Features
• Input under-voltage lockout
• Output current limit and short circuit protection
• Active back bias limit
Mechanical Features
• Industry standard sixteenth-brick pin-out configuration
• Size: 0.95" x 1.35" (24.1 x 34.3 mm)
• Output over-voltage protection
• Thermal shutdown
• Height: .327" (8.3mm) low profile and .397" (10.1mm) standard
• Weight: .476oz (13.5g)
Control Features
• On/Off control referenced to input side (positive and negative logic
options are available)
Safety Features
• Remote sense for the output voltage compensates for output
distribution drops
Pending
• Output voltage trim permits custom voltages and voltage margining
• 2250V input-to-output isolation
• UL 60950-1:2003
Contents
• CAN/CSA-C22.2 No. 60950-1:2003
• EN60950-1:2001
Page No.
SMA & SML Mechanical Drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SMC Mechanical Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PQ60012SMx25 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . 4-5
PQ60012SMx25 Standards & Qualification Testing . . . . . . . . . . . . . . . . 6
PQ60012SMx25 Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Application Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14
Ordering Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
• Needle Flame Test (IEC 695-2-2)
• IEC 61000-4-2
• RoHS compliant (see last page)
Product # PQ60012SMx25
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0005219 Rev. C
06/28/11
Page 1