Engineering Prototype Report -
70 W (19 V 3.66A) Universal Input
Adapter (EP11)
Title
Laptop Adapters, LCD Monitors,
Audio, High Power Adapters
Target
Applications
Power Integrations Applications Dept.
Author
Doc Num
Date
EPR-00011
22-January-2001
1.4
Revision
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Very compact design: (4.1” × 2.25” × 1.06”)
High power density - 7 W / inch³
Full output power (70 W) in sealed enclosure at 40°C ambient
High efficiency: 84% (85 VAC), 89% (230 VAC
Low no-load consumption: 350 mW (115 VAC), 500 mW (230 VAC
Low value input capacitor: 74% DCMAX and line feed forward allows 2 µF/W
Power limited during overload: overload output current less than 5 A at 19 V
Primary side soft-start: minimizes component stresses during start-up
Low EMI due to frequency jittering: meets CISPR22B with output cap. earthed
Line under voltage sense: no output glitches on power up or power down
Line over voltage shutdown: extended line surge protection
Hysteretic thermal shutdown: supply automatically recovers when fault is removed
Low component count: simple circuit and design
)
)
Single sided PC board: no plated through holes
No surface mount components required
Power Integrations Inc
5245 Hellyer Avenue, San Jose, CA 95138 USA.
Tel: +1 408 414 9200 Fax: +1 408 414 9201
www: http://www.powerint.com